Page 1 of 1
Stock Map for MPI
Posted: Mon Sep 15, 2014 3:45 am
by popup
Does anyone have a fuel and ignition map for an MPI? Just enough to get the car moving about to travel to get it mapped?
Posted: Mon Sep 15, 2014 9:26 am
by Alspos
You need to tell us what computer you are using. Does the manufacturer have a base map you can download that can be used for startup?
Map
Posted: Mon Sep 15, 2014 9:29 am
by Schultz
I thought all computers had a base map in it? and when you get it Dyno tuned they modify these base maps?
Posted: Mon Sep 15, 2014 8:10 pm
by popup
It would be an EVO 8 ECU so perhaps the stock map will be OK? Perhaps just back the timing off a little?
Posted: Tue Sep 16, 2014 9:49 am
by redzone
If you are using the evo 8 injectors & right fuel pressure it should start at least. Don't know if I'd drive it though.
Posted: Tue Sep 16, 2014 3:52 pm
by ProZac
If you're running the EVO VIII air flow meter and injectors you should be pretty close, close enough to drive it to a tuning shop anyway.
Posted: Tue Sep 16, 2014 10:09 pm
by fugazi
^ As above said.... and hook off the WG-arm so it fully open on the way over to the tuner....