Austarion

Hi Guys,

Decided to swap over the broken indicator wiper in my JD with the one I recently acquired (thanks Moz).





They obviously changed the plug that attaches to loom by the time JDs came along so now I have to work out how to get the black one to match up to the socket for the JD one in the loom (blue one).

Does anyone know what type of socket the blue one is so I can re-do the black one to fit?

Thanks for your help.

Cheers,
Neil

Do the wire colours match up between the two models? I see the plugs have the same number of pins. If so, I'd de-pin the old blue connector, snip all the pins off with a bit of wire still attached, snip the black plug off the new switch and match them up colour for colour. Solder on the pins from the blue connector, heatshrink, recover the loom, and job done?

Yep, the wire colours are the same. I guess that would probably be the thing to do. Looks like I've got some snippy snippy soldering to do.

Thanks.

see if you can pull the pins out before you snip them, the stalk was from a jb if that's any help

I'm thinking thie other end...
Is it more work to do it all at the other end of the "loom"?
(I really don't know how it looks inside...)

Closeup pics would be very nice (If I ever get ther myself!).


:beer