Page 1 of 1
arp head stud question
Posted: Tue Jan 07, 2014 10:12 pm
by bigmoz
do any of you guys have the part number for for ARP head studs to suit a standard starion block with starion head using a 1.6 cometic . The ones that i have here are a about 1mm less in diameter roughly 11mm compared to the stock 12mm ones, and if i screw them in they only leave y with 2-3 threads to put the nut on.
moz
Posted: Wed Jan 08, 2014 4:10 am
by Starion VR4
ARP 207-4701 are 12mm units, you will need to use a 10mm spacer as they are to long for our 4G63. :beer
Posted: Thu Feb 06, 2014 10:41 pm
by FrankZic
Is it enough to use washers, or maybe a nut with larger inside diameter?
Posted: Fri Feb 07, 2014 4:05 am
by Starion VR4
mptybox wrote:Is it enough to use washers, or maybe a nut with larger inside diameter?
No.
Posted: Fri Feb 07, 2014 6:40 pm
by fugazi
I'd say it's a no no!
Use ONE washer/spacer.
Posted: Sun Feb 16, 2014 1:38 pm
by avandull
ARP head studs for Starion are 2007-4201
Posted: Sun Feb 16, 2014 4:32 pm
by Starion VR4
avandull wrote:ARP head studs for Starion are 2007-4201
I just checked my stock... 207-4202 2,6L head studs. :beer