throttle body for mpi and distributor?

[JA83]

Hey guys need to know who is running what throttle body on their sonata manifold and what size is it? looking for one that runs a stepper motor idle speed motor for my haltech ps1000. magna? pajero?

Also what distributor do i need and does anyone have either forsale?

[Starion VR4]

Stepper motor unit I have used is Comomdore V6 VN, think they are 70mm. Also use XF-EF TB unit but these use PWM idle units. Only problem is both idle circuits are big so idle fluctuates with very little movement, had to end up restricting the hole size to half to make it work on 2L engines. Dizzy is a L-300 EFI 87-94 side mount unit. just pop the cap, tin shield & look at the trigger disk... should have 4 outer slots & one inner slot which is longer. :beer :beer

[TOMSUN]

Stepper motor unit I have used is Comomdore V6 VN, think they are 70mm. Also use XF-EF TB unit but these use PWM idle units. Only problem is both idle circuits are big so idle fluctuates with very little movement, had to end up restricting the hole size to half to make it work on 2L engines. Dizzy is a L-300 EFI 87-94 side mount unit. just pop the cap, tin shield & look at the trigger disk... should have 4 outer slots & one inner slot which is longer. :beer :beer

I also have VN unit. I haven't got around to doing the idle control for it yet. Do you have photos of the holes you modified and details of how you modified them?
Cheers

[JA83]

interesting! thanks for the info, what are peoples thoughts on using a tr/ts 2.6 tb?

[ProZac]

They're 60mm from memory, so would be more than large enough for a single-cam. That's what I'm going to use. Using the smallest throttle you can, that is still large enough to not cause a restriction will make the engine response more in line with pedal position.