Austarion

hey can someone tell me if the L300 16 valve sohc head will work on the staz`s 4g63?
looking forward to answers on this
Mackaman

If it is off a 6 bolt it should BUT check /place the Staz head gasket over the SOHC16 valver to see if all the holes match.That's what I would do but do not have 1st hand experience with the swap.
You will almost certainly need the manifold/s as well.

As far as I have seen they WON'T. The 16V had the dizzy hanging out the front of the engine & the valve cover is different. :beer