rear lsd option

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
Starion82
[L] Plates
Posts: 19
Joined: Sat Jan 10, 2004 10:06 am
Location: brisbane, aus

rear lsd option

Post by Starion82 »

hey guys found this while looking around, emailed them and they say will fit starion. could be a option for a nice rear lsd/locker

http://www.ebay.com.au/itm/200762959023 ... 26_rdc%3D1[/url]
ProZac
G33Kz0r
Posts: 2674
Joined: Thu Nov 27, 2003 1:26 pm
Location: Christchurch, New Zealand
Contact:

Post by ProZac »

Sounds like snakeoil... But would love to hear results if someone gave it a go?
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

The mechanics of it look reasonable enough, springs inside the blocks press the blocks against the face of the main gears inside the diff, stopping the gears spinning independently. Not sure what extra forces that would introduce on the bearings or whether it would be a long term issue. Also the tips of the gears become the thrust face, as they state if that isn't flat it will wear unevenly and make it useless. If the spring pressure drops over time then it would reduce it's effect too. Not sure how you would get the thing in there though without a big hammer.

Maybe a good experiment for $200......
Post Reply

Who is online

Users browsing this forum: No registered users and 37 guests