Page 1 of 1

help...dropped head bolt in engine

Posted: Sat Mar 03, 2012 3:57 am
by logik
hi all,

after a lengthy hiatus of anything starion related, i bolted my new head onto the starion.
after tightening the last headbolt, the headbolt extension came apart (two pieces) and fell into what i assume is an oil drain? (seriously FML)

Image

does this just go straight to the sump? or a complex pathway knowing my luck

its stuff like this that seriously puts you off cars...

james :glare:

Posted: Sat Mar 03, 2012 11:13 am
by Alspos
Can you attach a small magnet to a wire and fish it out? Or Repco and places have magnets on flexible posts...worth a try.

Posted: Sat Mar 03, 2012 11:44 am
by WidebodyWoody
Magnet pen is definetly worth a try.

Posted: Sat Mar 03, 2012 12:23 pm
by ProZac
Straight down into the sump that hole goes, there is a little bit of a lip though, might be sitting just down in there?

Posted: Sat Mar 03, 2012 5:28 pm
by redzone
hey man i have a magnet on a flexible wire thingy, look for something similar....

Posted: Sat Mar 10, 2012 6:08 pm
by enthuzed
That has gone into a water gallery, there is a metal claw device that you could use to fish it out. It's a lot like those magnets on a flexible length.
One of those may work as well.

Posted: Sat Mar 10, 2012 6:11 pm
by redzone
that isnt a water gallery! look at the colour for a start ;)

Posted: Tue Mar 13, 2012 9:32 pm
by logik
Got the fucker!

Goes straight to the sump; as soon as the sump was off it was sitting there staring at me in all its glory.

Fucking cars!

Posted: Tue Mar 13, 2012 9:59 pm
by fugazi
logik wrote:Fucking cars!
In Sweden we would call it SBS...
A free translation would be: SBTL=Shit behind the levers.... :D