Got a new Xover pipe
Posted: Sun Jun 20, 2004 8:02 pm
after being quoted $150 for 10" mandrel bent pipe I found this at an ENZED shop for $5. it pays to shop around..
oh, it goes very well.. :)
oh, it goes very well.. :)
Page 1 of 2
Posted: Sun Jun 20, 2004 8:20 pm
nice and free flowing, put an intercooler between it!
Posted: Sun Jun 20, 2004 9:47 pm
Wow thats a way better idea than fiddling about making a pipe!
What exactly is that i've never seen it before what's it called? (other metaliclic looking flexipipe stuff :) )
What exactly is that i've never seen it before what's it called? (other metaliclic looking flexipipe stuff :) )
new ex over pipe
Posted: Sun Jun 20, 2004 9:52 pm
there are 3 things that need fixing/repairing in that pic who can see them?
Posted: Sun Jun 20, 2004 11:40 pm
I picked the missing cover over the timing belt after just a quick look, and the fact that it needs a good clean in there.
Posted: Mon Jun 21, 2004 12:24 pm
there's a stuffed hose clamp on the other side of the hose from the radiator
Posted: Mon Jun 21, 2004 12:36 pm
tape on the (PCV?. PVC?) valve thingy on the bottom of the pic
Posted: Mon Jun 21, 2004 1:15 pm
Wow that looks great, ide srsly consider getting one, but i cant see how im gonna get a bov attached to that :(
So here is my noob question of the day, if i were to have an intercooler, would it simply connect between the 2 ends of the crossover, ie. the intercooler wud b between the 2 ends?
So here is my noob question of the day, if i were to have an intercooler, would it simply connect between the 2 ends of the crossover, ie. the intercooler wud b between the 2 ends?
Posted: Mon Jun 21, 2004 1:26 pm
it can be like that like in the WRX the intercooler is on top off the engine but most starions have got a fmic(front mount intercooler) that sits just under the front bar.
well someone else could give you better info than i can :beer
well someone else could give you better info than i can :beer
Posted: Mon Jun 21, 2004 4:15 pm
put quite simply.. yes.. the hot air from the turbo is cooled down with an intercooler before going into the throttle body.. :Dfr335tyl3r wrote:So here is my noob question of the day, if i were to have an intercooler, would it simply connect between the 2 ends of the crossover, ie. the intercooler wud b between the 2 ends?
i want one.. :(
Posted: Mon Jun 21, 2004 4:31 pm
lol okies then...hrm im trying to decide whether to spend my money on show or go....grrr...i can get the car up to registration standard again thru swapping stuff that isnt working from my other car.
then i have the big choice of doing engine mods, or making it pimp...lol
then i have the big choice of doing engine mods, or making it pimp...lol
Re: new ex over pipe
Posted: Mon Jun 21, 2004 4:52 pm
Where's those Mitsi clips to hold the leads together nicely away from the manifold ? is that it ?dokbob wrote:there are 3 things that need fixing/repairing in that pic who can see them?
Whers that hose clamp which is busted ?
Posted: Mon Jun 21, 2004 7:58 pm
Tape on PCV valve.
Missing top timing belt cover.
Missing hose off the compressor outlet?
Missing top timing belt cover.
Missing hose off the compressor outlet?
setting the record straight..
Posted: Mon Jun 21, 2004 8:31 pm
yep, the timing belt cover is missing, will go back on soon,Cordzboy wrote:Tape on PCV valve.
Missing top timing belt cover.
Missing hose off the compressor outlet?
the hose is not missing off the turbo, just looks that way, or the wastegate would not work, and yes there is tape around the PCV hose, it split and popped off the other night after a high boost session on the highway.. quick fix by the roadside...
:xCordzboy wrote:[there's a stuffed hose clamp on the other side of the hose from the radiator
that clamp is ok, just looks funny..
there's more than 3 things that need attention now anyway, I just need the time and patience, everytime I fix something something else seems to pop up out of nowhere...
Posted: Sun Jun 27, 2004 5:41 pm
Whats the hose made from? And did they have larger diameters?