Aftermarket Part Number Reference Guide

[TOMSUN]

Aaron,

Can you update the parts list.

The part "K1635S FRONT CALIPER KIT"
should be "K1365S FRONT CALIPER KIT"

Note this "kit" only comes with the piston ring seal, piston boot seal and bleed nipple cover from Protex. Missing slide boots seals

Found the full kit on eBay
One new front caliper repair kit, part number 071-7848. This fits -
Chrysler Conquest 1984 - 1989
Mitsubishi Starion 1983 - 1989
Toyota Cressida 1981 - 1988
Toyota Pickup (Gas) 2WD 1984 - 1991

:beer

[JJH]

Help please; is this, DKM08 BEARING WHOLESALE DIFF BEARING & SEAL KIT, the side bearing kit for ALL Starion diffs, and does it include both sides?
I presume it includes the bearings, if so, how much would I expect to pay & where can I get it from?
Thanks

[enthuzed]

JB/JD and GSRV/Widebody coolant temp sensor with two wires in "T" config can go faulty/corrode/get brittle and fall apart/give false signals to the computer/make the car run like crap or not at all. You want it working correctly.

Replace th plug and pins (you'll use only half the set) with a Narva two way connector housing set with terminals (Part # 56272BL), it's a perfect fit and with a cost of less than $5 from most decent auto aftermarket parts stockists.

Just a note too, worth checking continuity from the wires to the plug terminals too.

[panda]

Thanks for the tip Frank. I thought mine was faulty, but turned out to be a blocked radiator causing the overheating. All good now.

[fugazi]

MANN-filters
Good crossref and easy to find a bigger or smaller (oil-) filter for ex.
We use a lot of filters for vacumpums and maimley from MANN, good quality!