Uh oh.. Wiring loom question

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
Rev
I like starions
Posts: 117
Joined: Thu Jan 08, 2004 10:32 pm
Location: Perth
Contact:

Uh oh.. Wiring loom question

Post by Rev »

Hi,

I am in a bit of trouble.. :( The car is 99% ready to start up.. just have to fix these problems then it's ready. If anyone can help me here, I would be extremely grateful.

The injector wires have snapped off at the little rubber bit where they join the ECI.. I have soldered on some new wires, but I don't know which wire goes where in the loom...

Looking from over from the passenger-side guard, you can see where the 4 injector wires plug into the side of the ECI thing - looks like this:


* *

* *


What colour are each of the wires? Also, the main plug which the Injectors, TPS and some other stuff plugs into (about 10 wires in total) is gone... so if the injector wires aren't these colours,

yellow/green
yellow/blue
yellow/black
yellow/white
yellow/blue,

Could someone follow the injector wires back from the ECI to the plug, and tell me what colour the wires are on the other side of the plug.. they should be the above colours theoretically.. otherwise I screwed up the re-wiring. :( Argh, what a headache.

Also, what is the firing order of the engine as the pics I took are too blurry to make out which lead is plugged in where on the dizzy.

My lesson of the week is: ***If you want to convert to MPI, make sure you have enough money - buy EVERYTHING beforehand, and don't cut the original loom except where neccessary.**

ARGHH!!

Thanks in advance!
User avatar
Barney
Scorpion King
Posts: 929
Joined: Fri Jan 09, 2004 1:24 pm
Location: Perth WA

loom

Post by Barney »

Hi Rev

Sounds like fun. if your on line at the moment you can call me on
0412 475 321. im in Perth also you can come and have a look if you like.

It would be easyer to explain over the phone

ASHLY
Rev
I like starions
Posts: 117
Joined: Thu Jan 08, 2004 10:32 pm
Location: Perth
Contact:

Post by Rev »

Cool :) I'll give ya a call tomorrow.
User avatar
Will
Mine is bigger than yours
Posts: 333
Joined: Sun Jan 11, 2004 10:30 am
Location: Sydney
Contact:

Re: Uh oh.. Wiring loom question

Post by Will »

Rev wrote: Also, what is the firing order of the engine as the pics I took are too blurry to make out which lead is plugged in where on the dizzy.
Firing order is 1-3-4-2. If I remember correctly, #1 should be on the lower right of the dizzy cap if your dizzy is phased correctly.
Rev
I like starions
Posts: 117
Joined: Thu Jan 08, 2004 10:32 pm
Location: Perth
Contact:

Post by Rev »

Firing order is 1-3-4-2. If I remember correctly, #1 should be on the lower right of the dizzy cap if your dizzy is phased correctly

Thanks. :P
Post Reply

Who is online

Users browsing this forum: No registered users and 53 guests