Page 1 of 1

Dizzy to link

Posted: Mon Jul 06, 2009 5:34 pm
by palmystar
I am trying to run multipoint in one of my cars using the standard dizzy and a link g4 storm. I can't figure out how the wiring with the dizzy and link should be. I am currently using a bosch ignition module. Can anyone help me out??

Posted: Mon Jul 06, 2009 7:30 pm
by Junkers
You have a optical dizzy right?

Posted: Tue Jul 07, 2009 8:09 am
by OLD FART
I have a perfect optical dissy for sale if anyone needs one :D

Posted: Tue Jul 07, 2009 1:17 pm
by palmystar
Am using standard starion dizzy

Posted: Tue Jul 07, 2009 1:34 pm
by spinners
When you grabbed that multipoint manifold,did you get the optical dizzy off the Galant aswell?
Whakaronga autowreckers should have plenty.I heard you have to use them or are better with A/M ecu's.
My brother has one if you can't find another.

(Shit One hundred post!!It's taken me 4 1/2 years rofl :D

Posted: Tue Jul 07, 2009 2:02 pm
by JD_Stazza_Brendan
My old MPI setup uses standard Starion dizzy with a Link G1 V4 ecu. The V4 manual shows how to use a single module on a dizzy.

Posted: Tue Jul 07, 2009 3:42 pm
by palmystar
Went to whakaronga last week and they had no mpi sohc galants on the yard. Only had dohc or carby :? Had about 5 when i grabbed the manifold so should have grabbed it then. went to ace aswell and they had none. And couldn't find an l300 one either.

The guy i brought the link off reakoned it could be run off the standard dizzy but i can't get any results :flush

Posted: Tue Jul 07, 2009 6:29 pm
by spinners
palmystar wrote:Went to whakaronga last week and they had no mpi sohc galants on the yard. Only had dohc or carby :? Had about 5 when i grabbed the manifold so should have grabbed it then. went to ace aswell and they had none. And couldn't find an l300 one either.

The guy i brought the link off reakoned it could be run off the standard dizzy but i can't get any results :flush
Haha,I got a couple cheap about 4 months back from whakaronga,modifed and sold them to people wanting them for the same reason.
Did you ring Link technical support?They are helpful when it comes to troubleshooting?