Austarion

hey all,

just wondering if anyone has a diagram of all the piping involved with the tc06 on a starion. ive just noticed on my wastegate, there are two possible
places for putting a pipe, and only one pipe so im a bit stuck. want to go over my whole piping setup so if anyone has a diagram (not off the us
conquest, already tried :P) of the standard setup... speak up!

james.

Yeh cheers for all the replies, i couldnt go see my gf yesterday cause of this, pretty simple ask?

Thought id have another medium-sized whinge.

We all apologise for not sacrificing our time at no cost to you which has not enabled you to see your girlfriend.

What a heartless bunch we are.

apology accepted.

piping involved for tc06: theres a crossover pipe for the outlet, exhaust pipe on the compressor and wastegate, and the pipe from the airbox to inlet on the turbo.

after reading ur question a couple of times i think your asking where the hose from the manifold goes to on the wastegate actuator.? i think the curved one on the end. If not, you will just keep boosting, so really you coulda gone to ya womans house to get spanked if u put it on the wrong one, but you'ld just have to watch ya throttle! now go put the hose on and give one to ya missus for us

hehe just like the idiot mechanics did on my cordia.

lets just guess where the hose goes, wow it really goes now. Wooops fuel cut..... wooops there it goes again.

WELL the reason im asking all this is now irrelevant, i thought i might have had pipes where their not meant to be...

the reason im asking is my turbo is leaking oil from the oil return pipe UNDER the turbo, which is fkn impossible to get to. i cant see under it and
my room mate threw my old tc06 out so i couldnt check it. what type of connection is it, how can it leak?

as for my missus, she doesnt even like starions, bloody n13 pulsar drivers.

hah ;D

well, i have no idea about the oil lines on the turbs :S

the reason im asking is my turbo is leaking oil from the oil return pipe UNDER the turbo, which is fkn impossible to get to. i cant see under it and my room mate threw my old tc06 out so i couldnt check it. what type of connection is it, how can it leak?

would be the same connection as the oil line on the top of the turbo yeh? i can only think of it leaking if it's not tight enough or it may have a crack in it. Or its leaking from the turbs itself?

theres a reason i don't really post in the tech section u know

hey all,

got the turbo off today with the help of a mate and a few herbs.. turns out the pipe has cracked right near the flange. would explain a few problems
heh.

so whoever said it was the turbo itself, nup ;)

james.