All technical questions and answers regarding starions, being modifications to maintenance.
Cookiemonster
Mother Goose
Posts: 3177 Joined: Thu Jan 08, 2004 4:33 pm
Location: Sydney
Post
by Cookiemonster » Sun Jan 30, 2005 5:47 pm
StazzyBabyYeah wrote: chunkhead wrote: I was able to get 13B RX-7 injectors at $90 each! These are going to kick arse!
Will they just slot in? i want some!
yes.
Junkers
Formerly StazzyBabyYeah
Posts: 2338 Joined: Mon Nov 08, 2004 3:16 pm
Location: Christchurch
Post
by Junkers » Sun Jan 30, 2005 5:57 pm
series 4's have square plugs, series 5's have rounded plugs. i take it i want round ones?
Watch your speed - It's virtually impossible to pick it out of the carpet if it gets blown off the table.
4G64B
Lil' Dorifto
Posts: 41 Joined: Thu Jan 13, 2005 3:15 pm
Location: Lake Maquarie
Post
by 4G64B » Mon Jan 31, 2005 3:17 pm
Need to change the impedence of the signal running to injectors tho.
mrb1
gtpumps.com.au
Posts: 1559 Joined: Wed Jan 21, 2004 1:35 pm
Location: Sydney
Contact:
Post
by mrb1 » Mon Jan 31, 2005 3:32 pm
Be aware that the square injector connectors are easy to get. The rounded ones are much harder to find, and there are different types as well. I'm not saying which injectors to buy but if the guy has plugs to suit make sure you get them as well!
Junkers
Formerly StazzyBabyYeah
Posts: 2338 Joined: Mon Nov 08, 2004 3:16 pm
Location: Christchurch
Post
by Junkers » Mon Jan 31, 2005 4:10 pm
4G64B wrote: Need to change the impedence of the signal running to injectors tho.
can you easily do that with a ecu or do you need to fit resistors?
Watch your speed - It's virtually impossible to pick it out of the carpet if it gets blown off the table.
NXTIME
Registry Nazi
Posts: 2972 Joined: Thu Jan 08, 2004 3:14 pm
Location: Sydney, NSW
Post
by NXTIME » Mon Jan 31, 2005 6:02 pm
Sone ECU's can run either high or low impedence injectors, but best to check your particular ECU. If using a modified factory ecu, then you will need to change the resistors.
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
Users browsing this forum: No registered users and 12 guests