Turbo setup Issue. JA vs JD Turbo. BOV vs Plugged.

All technical questions and answers regarding starions, being modifications to maintenance.
fugazi
Enthusiast
Posts: 716
Joined: Thu Oct 02, 2008 10:30 pm
Location: Stockholm, Sweden
Contact:

Post by fugazi »

Shaitz... i just passed 500 posts...

Image

Not even a 10th of your's redzone... :beer
Image
Bruzman
I like starions
Posts: 125
Joined: Thu Dec 29, 2011 3:10 pm
Location: Port Macquarie NSW AUS

Post by Bruzman »

redzone wrote:3" dump pipe makes them spool quicker, the stock dump is uber restrictive..


TC05's can be ok if u wind the boost up.
Funny, I was actually just about to post some questions about the boost!

I plan to use a manual boost controller to raise my boost but I wanted afew things and I felt it was better to ask here in this thread then a new one.
like this boost controller:
http://www.carmodsaustralia.com.au/gfb- ... oller-3001

Whats the stock boost?

What is a safe boost the 1983 4g63t JA can handle? 14psi to much?

Also, I remember reading something about a boost cut or fuel cut or something with the ECU and boosting it... I cannot remember what I read.. Is that a concern or will a GFB Atomic Boost Controller work?


P.s. someone check out my other post if able;
http://forums.austarion.com/viewtopic.php?t=14523
Work on Car, Go to Gym, Pump Bitches = Life
fugazi
Enthusiast
Posts: 716
Joined: Thu Oct 02, 2008 10:30 pm
Location: Stockholm, Sweden
Contact:

Post by fugazi »

Use the search-button... fuelcut...

Take a look at "dawes device" too...
Image
Bruzman
I like starions
Posts: 125
Joined: Thu Dec 29, 2011 3:10 pm
Location: Port Macquarie NSW AUS

Post by Bruzman »

fugazi wrote:Use the search-button... fuelcut...

Take a look at "dawes device" too...
Did use the search button for raising the boost. I didn't search fuelcut tho. I'll do that now! thank you
Work on Car, Go to Gym, Pump Bitches = Life
TOMSUN
Group buy King
Posts: 2391
Joined: Fri Sep 10, 2004 10:24 am
Location: Sydney (Liverpool)

Post by TOMSUN »

Remember both these turbos are using compressor and exhaust wheels that were designed 30 years ago. There are more efficient turbos avaliable.

Does mrb1 have a bolt on solution?
1985 JB Starion #157
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

yeah pretty much, but this guy wants to use stuff he has lying around..


cheers fugazi, my post count is SCARY lol :beer
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

As I've changed over my TC05 (JD type) to a TC06 (JA type but water-cooled) I suppose I should comment...

With the TC06, I added a bigger compressor wheel (17C) and a 3 inch dump, BUT the thing has too much lag before it gets going and when it does,
you're 4000rpm + and then the rush hits in. Great for the race track I suppose.
I think for the street, the TC05 is better and response down low will be more noticeable. As previously mentioned, increase boost to just under 1 bar(~12lbs)
and install hi-flo dump with a decent exhaust. With the intercooler installed it should allow enough condensed air/fuel to keep up with turbo...

I'd go for the JD turbo and enjoy the low down response! Just don't expect too much of a rush after 5000rpm!

:beer
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
starspeed
Former Freak
Posts: 196
Joined: Tue May 30, 2006 11:38 pm
Location: Port Macquarie

ooooohhhhh

Post by starspeed »

Hi BRUZMAN ,
oh and Mal -JDSTAZ45! try a JD turbo with a HKS rally cam
Ooowesome :D :D :D :beer thats what i have in mine !! :twisted:
STARSPEED

86 COLTSPEED JD STARION ( my baby )
2000 MITSUBISHI CHALLENGER LS 4X4 ( daily driver )
2010 KIA SORRENTO R ( family car )
83 stebercraft 475 DF - 70hp johnson ( my toy )
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 3 guests