factory boost cut

[jedi]

the saving grace with running higher than stock boost on a starion is the very low compression ratio (7.6:1)
13 maybe 14 psi would be the most id boost ina stock staz
also remember differtn models run differtn injectors and ecu , so 15 psi on a later model may be ok, but on a early model it will lean out and could go bag!

yeah i got a bosh 500hp fuel pump in mine hopping to get that little bit more out of it but didn't make much differents still started leaning out around 11psi but was running 20g i bought a fuel pressure regulator for it but pain in ass to set up with the single pot injection can be done though but just put it in when dohc engine goes in.