Non functioning Boost Controller

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
User avatar
Glen GSR III
guess its me thats broke
Posts: 581
Joined: Wed Jan 11, 2006 7:34 pm
Location: Toowoomba, Queensland

Non functioning Boost Controller

Post by Glen GSR III »

Hey,

I just picked up a JA to use as a daily driver and decided to fit a boost controller today.

I grabbed a $100 one from autobarn and fitted it....took it for a drive and still only 7 psi...thought i must have plumbed it backwards so i swapped it around but still nothing.

I did a search on B.Controllers and found a turbosmart diagram and mine was plumbed exacltly the same.....any ideas as to why its not working???

Thanks
82 GSR III starion (respray nearly complete!)
83 JA Starion...Daily Driver
01 KTM 520 trail bike (reason the staz isnt finished yet)
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

What brand is the one you got?

Some of them need to be wound out quite a lot before they start to come effective
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
User avatar
Glen GSR III
guess its me thats broke
Posts: 581
Joined: Wed Jan 11, 2006 7:34 pm
Location: Toowoomba, Queensland

Post by Glen GSR III »

Power up is the brand name.
82 GSR III starion (respray nearly complete!)
83 JA Starion...Daily Driver
01 KTM 520 trail bike (reason the staz isnt finished yet)
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

I had one of those. try giving it a blow out with compressed air.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
User avatar
Starion_Turbo
Enthusiast king
Posts: 898
Joined: Wed Dec 08, 2004 5:32 pm
Location: South Australia
Contact:

Post by Starion_Turbo »

$100 is a bit rich for a generic boost controller, even the GFB are less than that.
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

yeah try and swap it for a GFB one if u can, they seem to be the best of the cheapies, the turbosmart seem to spike really easily (unless u modify em like i do)
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
Glen GSR III
guess its me thats broke
Posts: 581
Joined: Wed Jan 11, 2006 7:34 pm
Location: Toowoomba, Queensland

Post by Glen GSR III »

ok update...i borrowed a GFB controller and plumbed it up...still no joy.

Also now the car will not make full boost, it goes up to around 4 psi, and seems to spike sometimes....i was thinkin maybe a leak in I/C piping but then I thought bout possibly a partially stuck open wastegate?

anyone with prior experience?

Im guessing that if the wastegate isnt shuting properly it would also be the reason why the boost controllers wouldnt work...
82 GSR III starion (respray nearly complete!)
83 JA Starion...Daily Driver
01 KTM 520 trail bike (reason the staz isnt finished yet)
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

You probably need a restrictor in the line before your tee.

I suggest a 1mm or 1.5mm hole in a slug of brass or similar. Just push it into the rubber hose.

This should help. It restricts the volume of air going to the actuuator and bleed valve, but not the pressure.
User avatar
Starion_Turbo
Enthusiast king
Posts: 898
Joined: Wed Dec 08, 2004 5:32 pm
Location: South Australia
Contact:

Post by Starion_Turbo »

what boost did you get b4 you installed the controller?
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
User avatar
Glen GSR III
guess its me thats broke
Posts: 581
Joined: Wed Jan 11, 2006 7:34 pm
Location: Toowoomba, Queensland

Post by Glen GSR III »

Al- Thanks, i'll try that.. :) In regards to the low booosting problem, do you have any ideas on that?

S. Turbo- I was getting 7 psi, although occasionly it seemed to momentarily lose power under load and go down to 5 psi...
82 GSR III starion (respray nearly complete!)
83 JA Starion...Daily Driver
01 KTM 520 trail bike (reason the staz isnt finished yet)
User avatar
Cookiemonster
Mother Goose
Posts: 3177
Joined: Thu Jan 08, 2004 4:33 pm
Location: Sydney

Post by Cookiemonster »

Remove all vacuum sources from the wastegate actuator and carefully take it for a drive.

I say carefully because it should make boost like crazy if all is good. If it still only goes to 7psi, than you have a stuck open wastegate, wastegate flap leak, intake leak etc etc.
FST4RD
almost postwhore
Posts: 1223
Joined: Sat Dec 09, 2006 10:22 am
Location: Christchurch

Post by FST4RD »

Those turbosmart boost controllers use a spring and ball type system.... My one didn't work either and I found the sring inside was to strong and wouldn't let the system open... i cut a coil or 2 off and it worked perfectly! I know it doesn't solve your problem but if you get the root problem sorted you might want to try that...
Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests