Spark plug wires....

All technical questions and answers regarding starions, being modifications to maintenance.
Lancerdriver
Newcomer
Posts: 8
Joined: Tue Jul 12, 2005 4:15 am
Location: germany
Contact:

Post by Lancerdriver »

mrb1 wrote:Magnecors are the best leads for sure. Maybe hard to find in Poland :)
The original spiral core design much copied now.

Had a set of the original orange leads on my car for 7 years still working fine. Only reason I changed that particular set was I converted to direct fire ignition.

http://www.magnecor.com.au

http://magnecor.com

You will only have to buy leads once :wink:
Not cheap but you get what you pay for.

If you are on a budget the only other leads I would recommend are the spiral core Bosch leads that Super Cheap sell. Good low resistance leads.
I also use Magnecors and there are no problems at all.
I changed Plugs from NGK BPR7ES to NGK BPR6ES. What a difference. The cars runs like evil. :D
Image
User avatar
mrb1
gtpumps.com.au
Posts: 1559
Joined: Wed Jan 21, 2004 1:35 pm
Location: Sydney
Contact:

Post by mrb1 »

Lancerdriver wrote:
mrb1 wrote:Magnecors are the best leads for sure. Maybe hard to find in Poland :)
The original spiral core design much copied now.

Had a set of the original orange leads on my car for 7 years still working fine. Only reason I changed that particular set was I converted to direct fire ignition.

http://www.magnecor.com.au

http://magnecor.com

You will only have to buy leads once :wink:
Not cheap but you get what you pay for.

If you are on a budget the only other leads I would recommend are the spiral core Bosch leads that Super Cheap sell. Good low resistance leads.
I also use Magnecors and there are no problems at all.
I changed Plugs from NGK BPR7ES to NGK BPR6ES. What a difference. The cars runs like evil. :D
BPR6ES are too hot for track work maybe ok on the road. 7 is the standard heat range.
I use B8EGV but I am running M&W CDI.
87_starion
Big Dorifto
Posts: 88
Joined: Wed Oct 13, 2004 3:46 pm
Location: Central AK - N.Z

Post by 87_starion »

I've run NGK BP6ES, car didnt run as well. Went back to Mitsi factory spec. Better all the way.

Tried loads of leads on my Starion, settled with NGK. Never had a problem with them. Did 14.3 on crappy Meremere track in my stock 87 staz, still got the factory exhaust, this was with the NGK BP7ES and NGK leads. Runs nicely like this.
96 R33 GTS25t - 4 Sale
02 Impreza
User avatar
truespinmice
Big Dorifto
Posts: 79
Joined: Sat May 20, 2006 2:17 am
Location: POLAND, EUROPE
Contact:

Post by truespinmice »

Okey.........

So, today I have put new set into car (NGK B7ES and NGK RCHD 411).

Engine is running very smoothly and nicely (better then before).

In my subjective opinion engine better respond to acceleration and generally is brisk.


ps. previously I have two pair of different set of wires :shock: (memento of previously owner).


THANKS FOR ADVICE AUSTARION :beer
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests