A couple of questions about tuning a 2 litre!

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
lindahl
Newcomer
Posts: 8
Joined: Wed Dec 13, 2006 7:14 am
Location: Denmark

A couple of questions about tuning a 2 litre!

Post by lindahl »

Hello downunder :P

I got a Starion widebody that I´m planning to modify a little. The thought is 1 bar or 14,7 psi. It´s a 2 litre intercooled with 177 hp.
The plan is the following:
2,5" downpipe
2,5" exhaust
16G turbo
Fuel cut defender
Bosch fuelpump
K&N filter element, and modded airbox
Lightened flywheel

I want to retain the standard SPI, camshaft and internals, as it would be way to expensive to upgrade this.

My questions are:

What are the standard IC good for? It seems rather large, but does it suck?

Will it be of any good to get the standard ECU chipped, to fix the flat spots and get the mixture more right, or is it better to leave the mixture a little too rich, if you plan on running more boost?

What kind of hp could you expect when running 14,7 psi?

Cheers Martin
Do or do not - There is no try!
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Re: A couple of questions about tuning a 2 litre!

Post by redzone »

What are the standard IC good for? It seems rather large, but does it suck?

no it doesnt suck, they do very well!

Will it be of any good to get the standard ECU chipped, to fix the flat spots and get the mixture more right, or is it better to leave the mixture a little too rich, if you plan on running more boost?

just change to an aftermarket management and dont look back! i did however run 13.8 with the standard management, but that was with a lot of development..

What kind of hp could you expect when running 14,7 psi?

with what turbo? u said a 16G, do u mean the evo 3 lancer TD05H?? i'd say between 190 and 230 hp at the wheels, depending on a lot of variables.

i recommend going 3 inch mandrel bent from the turbo back instead of 2.5, there is a noticeable difference between the two in power, for not much more cash, and good quality mufflers will keep the noise down just as low as 2.5 inch..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
lindahl
Newcomer
Posts: 8
Joined: Wed Dec 13, 2006 7:14 am
Location: Denmark

Re: A couple of questions about tuning a 2 litre!

Post by lindahl »

I thought about this one:

http://cgi.ebay.com/ebaymotors/TD05H-Bi ... 2575QQrdZ1

I don´t really want to go for a aftermarket ecu, at least not yet. Though I have a soft spot for the Megasquirt, which is also reasonable in price!
Do or do not - There is no try!
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

steer away from ebay turbos, easy way to get ripped off!

MRB1 on here sells those turbo's and he's 100% trustworthy..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests