MPI question

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
User avatar
woops
Big Dorifto
Posts: 88
Joined: Mon Apr 25, 2005 11:38 pm
Location: brisbane

MPI question

Post by woops »

Hey i was just looking on the cordiapower website and they were saying something about the hh galant multipoint manifolds fitting the 4g63 engine.

I thought the only multipoint manifolds that fit our heads are the sonata and the l300 ones. Is there anybody who can confirm this as another manifold to look for multipoint or is there a reason why i haven't seen and of the starion guys using them.
Entaran
I love starions
Posts: 448
Joined: Mon Sep 27, 2004 6:07 pm
Location: Ballarat, Vic

Post by Entaran »

Which model Galant?

I'm assuming the singlecam SE model...

GSR is DOHC VR4 motor minus the turbo and oil squirters and with different cams

VR4's... speak for themselves.
User avatar
AB
Mine is bigger than yours
Posts: 281
Joined: Wed May 25, 2005 12:27 am
Location: Wellington, New Zealand

Post by AB »

The SOHC galant manifold fits, it should be the same (or at least close to it) as the Sonata manifold because they use Mitsubishi engines.
I've got some pictures of a Galant manifold if you want to compare.
User avatar
rallidave
Enthusiast king
Posts: 889
Joined: Mon Feb 27, 2006 11:14 pm
Location: cairns

Post by rallidave »

so does the sohc 4g63 in the l300's, but not as efficient
85 JB 4g63 SOHC
94 EVO2 4g63 DOHC
i wanna go fast
rxtoy
Big Dorifto
Posts: 88
Joined: Fri Jun 18, 2004 3:24 pm
Location: Auckland, NZ

Post by rxtoy »

4G63 Galant ones are meant to fit (haven't tried it, still keeping an eye out for an L300 manifold) but the throttle body has to swap ends because it will be facing the firewall.

there are a couple of different versions of it, from memory the one with the longer inlet runners is the one to have but there should be plenty of people on here that can give a better technical explanation than that.

cheers
Matt
project 1: 1976 TA23 Celica
project 2: 1981 EX Lancer, SOHC 4G63T conversion, heaps of turbo lancer bits, running, but fixing the diff at the moment :D
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests