intercooler size???? large pics

ukstariont3 · Post by **ukstariont3** » Sun Jul 02, 2006 7:26 am

hi, i am going to fit a diffrent intercooler. it is the same width, but 3x as deep. will this is make a big diffrence??????

i am running around 20psi boost, 2.5" s/steel ex, large turbo, standard cam, port/polished head, forged pisatons etc.

any help would be great, :beer
Dave

ukstariont3 · Post by **ukstariont3** » Tue Jul 04, 2006 7:50 am

heres some pics. fitted it today.

bit deeper than standard

view with the rad out

fills he gap quite nicely, not too in your face.

RiceThief · Post by **RiceThief** » Tue Jul 04, 2006 7:40 pm

ukstariont3 wrote:hi, i am going to fit a diffrent intercooler. it is the same width, but 3x as deep. will this is make a big diffrence??????

i am running around 20psi boost, 2.5" s/steel ex, large turbo, standard cam, port/polished head, forged pisatons etc.

any help would be great, :beer
Dave

How much difference the thicker cooler will make will depend on the type of core. However the thicker core should improve cooling efficiency.

85_cordia_gsr · Post by **85_cordia_gsr** » Wed Jul 12, 2006 11:13 am

i'd recomend gettin sum mandrel bends in there, the right angle bends you have at the moment wouldnt be helping much in the power department...

mrb1 · Post by **mrb1** » Wed Jul 12, 2006 5:04 pm

You really need a cam as well to get it to haul. My car increased 30hp at the wheels at 7000 RPM with a cam change! That's using a stock head!

Starion_Turbo · Post by **Starion_Turbo** » Wed Jul 12, 2006 8:42 pm

i'd like to hear what cams are availiable, gains, price etc, and weather they would work with stock ecu.

Junkers · Post by **Junkers** » Thu Jul 13, 2006 4:33 pm

What is the rev range suited to with that cam mrb1?

Austarion

intercooler size???? large pics

intercooler size???? large pics

Re: intercooler size???? large pics

Who is online