Vapor Lines.

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
douglovin
[P] Plater austaz
Posts: 24
Joined: Fri May 05, 2006 3:37 pm
Location: Conroe, Texas

Vapor Lines.

Post by douglovin »

Are they required? Can I just remove them. I don't want to have to add extra on my fuel cell.
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

Not a good idea to remove them. Vapour will build up and pressurise the tank. Or conversely, cold night the tank sides will want to pull inwards and could buckle (extreme case of course.)
Or fit a vented fuel cap, but on a fuel cell inside the car you probably would want to avoid that too.
douglovin
[P] Plater austaz
Posts: 24
Joined: Fri May 05, 2006 3:37 pm
Location: Conroe, Texas

Post by douglovin »

Ok sounds good. I guess I will leave it on and just add another fitting on my fuel cell. Sorry for the dumb question ;p
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

Dumber if you don't ask.

Others may have had more experience than I have. Couple on here have cells.
User avatar
AB
Mine is bigger than yours
Posts: 281
Joined: Wed May 25, 2005 12:27 am
Location: Wellington, New Zealand

Post by AB »

I don't know if this helps or not but in NZ Cordia's came stock with no emissions gear so there's no charcoal canistor or any vapour lines to or from the fuel tank. (I assume this is what your talking about?)
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests