ECU Chip is Nearly there!

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
flav
Austarion Occupant
Posts: 3374
Joined: Thu Apr 15, 2004 9:57 pm
Location: Melbourne

ECU Chip is Nearly there!

Post by flav »

Our new chip (ZOOM/AUNGER) is currently being tested, if it comes up to specs then we will be offering it soon! There may be a tad of soldering involved, or we could do it for you. Either way it will be a superb bargain to all the gang... for that little bit of extra we all hang out for.
Image

...and we tested the one before this one on Dallas' bike. :D

Image
User avatar
FullOfPlasma
Lil' Dorifto
Posts: 46
Joined: Tue Apr 04, 2006 12:12 pm
Location: Geelong

Post by FullOfPlasma »

I find the proximity of that engine to ones testicles somewhat disturbing.
"I've been really drunk in several major capital cities around the world, but Tokyo was the most fun...so far!"

VL's are for someone who can't afford a skyline but is willing to spend the cost of a GTR modifying it.
WidebodyWoody
Woodwide
Posts: 3133
Joined: Thu Jan 08, 2004 6:24 pm
Location: Gold Coast
Contact:

Post by WidebodyWoody »

but looking at them guy, he is disturbing
User avatar
stealth gaysr
[P] Plater austaz
Posts: 27
Joined: Fri Mar 17, 2006 11:25 pm
Location: NSW

d

Post by stealth gaysr »

if thats really a real engine motor bike, thata a v12 engined motor bike. is it real or what.
User avatar
AB
Mine is bigger than yours
Posts: 281
Joined: Wed May 25, 2005 12:27 am
Location: Wellington, New Zealand

Post by AB »

It looks like an x24 to me, if there is such a thing. There's another row of pistons under the carbs with another set of spark plug wires.
What's with the extra two pistons at the front with their own little carbs?

Edit: Here's a bit of an explanation http://www2.hunterlink.net.au/~ddped/joebody.html
sillbeer
I like starions
Posts: 147
Joined: Wed Mar 17, 2004 7:36 pm
Location: Perth, Western Australia
Contact:

What's the latest

Post by sillbeer »

Hey flav

What's the latest on these chips?

Cheers
Brendan
1984 Galant (Sigma) Turbo (aka 4-door Starion) - *** NOW SOLD ***
http://www.ipixel.com.au/temp/84galantturbo/

Silvia Rebuild Project
http://www.sillbeer.com/
User avatar
Starion_Turbo
Enthusiast king
Posts: 898
Joined: Wed Dec 08, 2004 5:32 pm
Location: South Australia
Contact:

Post by Starion_Turbo »

Hi

I have produced 8 of these chips with 6 Remaining for sale at this time.

See here for full details:
http://forums.austarion.com/viewtopic.php?t=6375
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
sillbeer
I like starions
Posts: 147
Joined: Wed Mar 17, 2004 7:36 pm
Location: Perth, Western Australia
Contact:

Post by sillbeer »

Ah, now the penny drops. I wondered if these were linked in some form. Can you tell me does the chip remove the boost cut? Any other details about the programming of this chip you can let us in on?

Thinking of putting into the Galant as one it's running rich under full boost, yet it's running super lean (too lean) under minimal load/cruising.

Cheers
Brendan
1984 Galant (Sigma) Turbo (aka 4-door Starion) - *** NOW SOLD ***
http://www.ipixel.com.au/temp/84galantturbo/

Silvia Rebuild Project
http://www.sillbeer.com/
Post Reply

Who is online

Users browsing this forum: No registered users and 22 guests