Hey everyone,
I'm having a few more problems with the staz. :x Once the car gets warm, if i try to accelerate any more then about 1/4 of the pedal travel the car just bogs down and loses all power. When the car is cold it doesn't do it. I've replaced the fuel pump, fuel filter and the alternator trying to fix this problem, all have helped a bit but not much. From what i've read and been told i'm thinking it could be the ignitor or the temp sensor?? Any ideas would be much appreciated.
Thanks,
Matt
Bogs down when warm
- silvastazza
- [P] Plates
- Posts: 37
- Joined: Thu Aug 04, 2005 5:11 pm
- Location: Brisbane
- logik
- I love starions
- Posts: 397
- Joined: Tue Jan 13, 2004 1:47 pm
- Location: bunbury, western australia
- Contact:
sounds like the car is running rich
i absolutely hate this problem and i have done pretty much the same thing that you have until i paid for a dyno/airfuel run and found out the problem.
my old starion used to accelerate quicker at 3/4 throttle than WOT.
perhaps your ignition is too far retarded? you might be on the money with the temp sensor as your car might still think its cold when in fact it is actually warm.
just my 2c
i absolutely hate this problem and i have done pretty much the same thing that you have until i paid for a dyno/airfuel run and found out the problem.
my old starion used to accelerate quicker at 3/4 throttle than WOT.
perhaps your ignition is too far retarded? you might be on the money with the temp sensor as your car might still think its cold when in fact it is actually warm.
just my 2c
gordonspec® racing
- silvastazza
- [P] Plates
- Posts: 37
- Joined: Thu Aug 04, 2005 5:11 pm
- Location: Brisbane
OK i've just discovered that once the car is warm it doesn't bog down because of how much throttle your giving it, it's whenever it tries to come on boost, but when cold it boosts perfectly. Also when its warm and start to play up the radio starts cutting out when im brakin or got my lights on or something that draws power and the engine isn't revving (could this be connected to the problem??)... This is shit.
- silvastazza
- [P] Plates
- Posts: 37
- Joined: Thu Aug 04, 2005 5:11 pm
- Location: Brisbane
-
- Woodwide
- Posts: 3133
- Joined: Thu Jan 08, 2004 6:24 pm
- Location: Gold Coast
- Contact:
- silvastazza
- [P] Plates
- Posts: 37
- Joined: Thu Aug 04, 2005 5:11 pm
- Location: Brisbane
Who is online
Users browsing this forum: No registered users and 30 guests