Auxilliary injection system

galagaza · Post by **galagaza** » Thu May 26, 2005 10:42 am

Ill put the whole MPI thing on hold as I dont have that kind of money. So now im thinking some extra additional injectors instead. In the us this is a populear way to reach 300 hp cheap with the stock, similar injection system..

Has someone tried it?

Can you recomend a system?

Post by **Alspos** » Thu May 26, 2005 11:48 am

Why bother, you may as well wait until you have the dough and do it properly.

SpidersWeb · Post by **SpidersWeb** » Thu May 26, 2005 12:28 pm

Also remember its a touch easier for the US guys, their engine is 600cc larger. So what they do for 300hp is different to what we do for 300hp. Extra injectors might work, but just save up, do it properly.

gotrice? · Post by **gotrice?** » Thu May 26, 2005 12:39 pm

jay car have the diy computer kit for adding an extra injector

galagaza · Post by **galagaza** » Thu May 26, 2005 11:20 pm

SpidersWeb wrote:Also remember its a touch easier for the US guys, their engine is 600cc larger. So what they do for 300hp is different to what we do for 300hp. Extra injectors might work, but just save up, do it properly.

I know I wont make 300hp with it, but the MPI is so expensive..

Is it so that the stock ECU on the starion only supply fuel for up to 13 PSI, so if you remove the boost cut, you risk to lean out?

Junkers · Post by **Junkers** » Thu May 26, 2005 11:42 pm

Put the cash towards MPI, there is no comprimise. I am in the same position as you and find MPI to expensive it's just one of those things that will have to wait.

galagaza · Post by **galagaza** » Fri May 27, 2005 7:31 am

StazzyBabyYeah wrote:Put the cash towards MPI, there is no comprimise. I am in the same position as you and find MPI to expensive it's just one of those things that will have to wait.

Id say the extra injector system is a compromise, but not as effective as MPI though..

Junkers · Post by **Junkers** » Fri May 27, 2005 10:55 am

Woops should of made that a bit more clear.
I meant there is no comprimise for accuracy, not price.

fil · Post by **fil** » Fri May 27, 2005 11:18 am

Build a megasquirt, the major cost of mpi is the computer the manifold only costs around 200. You can buy a full megasquirt for around $200. That makes say $500 for the conversion plus you cant put a price on how much you will learn when building/installing a megasquirt.
Good luck

Junkers · Post by **Junkers** » Fri May 27, 2005 11:45 am

I'm really keen to do that, the assembly and installation should be alright, but what puts me off is tuning it, looks hard.

galagaza · Post by **galagaza** » Fri May 27, 2005 12:14 pm

fil wrote:Build a megasquirt, the major cost of mpi is the computer the manifold only costs around 200. You can buy a full megasquirt for around $200. That makes say $500 for the conversion plus you cant put a price on how much you will learn when building/installing a megasquirt.
Good luck

I have given megasquirt a lot of thought, I was hoping too get some moore info on it though, Ill make a new thread on it on this forum.

FuelinjectionPro · Post by **FuelinjectionPro** » Sat May 28, 2005 4:42 am

galagaza wrote:Ill put the whole MPI thing on hold as I dont have that kind of money. So now im thinking some extra additional injectors instead. In the us this is a populear way to reach 300 hp cheap with the stock, similar injection system..

Has someone tried it?

Can you recomend a system?

galagaza,
We have developed complete kits for throttle body cars, complete with larger injectors, ECU, and wiring. Also controllers for extra injectors.
If you like checkout our site http://www.fuelinjectionpro.com/
ED

Monty · Post by **Monty** » Mon May 30, 2005 2:50 pm

hey guys ive got an hks additonal injector kit that squirts into the intercooler pipe just as it goies into the inlet manifold but don't knwo how well let alone if it works so hopefulle it will

chow lee

Austarion

Auxilliary injection system

Auxilliary injection system

Re: Auxilliary injection system

Who is online