hi, is it possible to replace oil pump without removing engine from car?
tq
oil pump
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
yes, you can remove the sump after blocking the engine up on the mounts..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
-
- Austarion Occupant
- Posts: 3578
- Joined: Tue Apr 06, 2004 1:21 pm
- Location: Melborno
- Contact:
You can take the sump off too without getting the motor higher...in the gap at the front when all the pan bolts are out you can remove the two 12mm bolts holding the oil pickup in the sump & manoeuvre it out. Same goes for the sump if the crank is turned so the lobes are left/right instead of hanging down.
Then you'd get free run at the pump.
Then you'd get free run at the pump.
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
Who is online
Users browsing this forum: No registered users and 9 guests