No Dash Lights

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
StarionJD
[P] Plater austaz
Posts: 28
Joined: Sat Jan 26, 2008 10:04 am
Location: Melbourne

No Dash Lights

Post by StarionJD »

My JD seems to have the 2013 blues as several things have busted.

No dash lights when I push parking light switch or headlight switch. All parking lights come on ok.

Not sure if this is related, but turning lights work both sides but flash at what seems to be at half the normal rate.

Any ideas?

TIA
Jako
User avatar
panda
Enthusiast
Posts: 680
Joined: Fri Apr 18, 2008 2:56 pm
Location: Mount Gambier, South Australia

Post by panda »

Pull out the instrument panel from the dashboard, & check the multi-pin connectors, & the earthing. Also look around for any dodgy wiring from previous owners. I'm assuming you have checked all the fuses first.
Dreams have no limits.

1982 JA - Ex Enthuzed
1982 JA - For Sale - pending
1983 JA - Ex Auto-cross car - being parted out
1983 JA - Being parted out
1984 JA - Rolling shell - For Sale
1985 JB - Rally car project
1985 JB - Autocross car
1985 JB - Week-end cruiser
StarionJD
[P] Plater austaz
Posts: 28
Joined: Sat Jan 26, 2008 10:04 am
Location: Melbourne

Post by StarionJD »

panda wrote:Pull out the instrument panel from the dashboard, & check the multi-pin connectors, & the earthing. Also look around for any dodgy wiring from previous owners. I'm assuming you have checked all the fuses first.
Thanks for the reply, panda.

No previous owner of the JD. Only thrre items non original: fuel pump (Bosch), windscreen and fuel cap. Trying to work out wiring for a diffrent radio atm.

Had instrument panel out but maybe should do so again. Metered all fuses near the steering wheel. All good. Have workshop manual (photocopied) but at times does not give required info. Currently suspect flakey earth..........somewhere.
Jako
StarionJD
[P] Plater austaz
Posts: 28
Joined: Sat Jan 26, 2008 10:04 am
Location: Melbourne

Post by StarionJD »

Had yet another go at this problem. Assumed nothing that I had learned at previous sessions was true. As a post mortem I realised this: using the sliding fuse tester told me much more than I thought originally. Combined with the prints it was screaming that the intesity pot assy was broken. It was. However it was a problem to replace as I don't have Japanese hands. Thanks to Peter Ambros who had supplied me with that assy previouslt.
Jako
popup
Mine is bigger than yours
Posts: 252
Joined: Thu Jun 07, 2012 11:14 pm
Location: UK

Post by popup »

I seem to remember it was easier to take out the instrument cluster and try and get a hand down from there when I removed mine, it was certainly tricky!
1986 UK 2 litre intercooled narrow body
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

Can we get a pic of this component/assembly and it's approx. location?
I wouldn't mind having it clear in my head where to trouble shoot if I come across this problem....
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

It's the knob on the dashboard just to the right of your ignition barrel. Has a picture of a globe on it.
StarionJD
[P] Plater austaz
Posts: 28
Joined: Sat Jan 26, 2008 10:04 am
Location: Melbourne

Post by StarionJD »

popup wrote:I seem to remember it was easier to take out the instrument cluster and try and get a hand down from there when I removed mine, it was certainly tricky!
Instrument cluster was only connected to speedo cable. Ease of access to dimmer seems to depend on how you position your tongue!
Jako
StarionJD
[P] Plater austaz
Posts: 28
Joined: Sat Jan 26, 2008 10:04 am
Location: Melbourne

Post by StarionJD »

JDSTAZ45 wrote:Can we get a pic of this component/assembly and it's approx. location?
I wouldn't mind having it clear in my head where to trouble shoot if I come across this problem....
Tried to upload pics of assembly but msg I get is "Webpage cannot be found". (http://www.fr33z3.net/upload.php)

See ebay ad at: http://www.ebay.com.au/itm/MB196670-Mit ... _391wt_764

Fourth pic shows the spade connectors. To test: connect vertical spade to a 12V bulb. Bottom spade connects to +12V and the other side of the bulb. Top spade connects to other terminal of battery. Intensity should change smoothly.

PN is MB196670 and this assy seems to have been used in lots of Mitsubishi cars.

Troubleshooting is actually quite easy. Fuse 7 (Position(R)) on fuse panel controls right hand rear parking lights and rear number plate lights. If these work but you have no dash lights the rheostat is broken.
Jako
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

StarionJD wrote: the intesity pot assy was broken
= dimmer switch/dial is stuffed. Ah, I get it now! :oops:
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
popup
Mine is bigger than yours
Posts: 252
Joined: Thu Jun 07, 2012 11:14 pm
Location: UK

Post by popup »

Sometimes known as a varistor too!
1986 UK 2 litre intercooled narrow body
Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests