Sump Oil Lines

benno91 · Post by **benno91** » Mon Sep 10, 2012 10:52 pm

Nearly done with the rebuild of my G63B with the Sirius Dash head but I cannot remember where one of the oil lines on the sump is goes to. I know one is for the oil return from the turbo but it's the smaller second one right next to it that i can't work out, Its probably something simple that I'm over looking. Also how much oil does the engine take including the oil cooler?

popup · Post by **popup** » Tue Sep 11, 2012 5:17 am

Thats the oil return from the air/oil vapour catch can thingy that mounts on the air filter. Underneath the catch can is where oil collects and should drip down the pipe back into the sump.

benno91 · Post by **benno91** » Tue Sep 11, 2012 7:33 pm

Can't believe I missed that, any idea how much oil the G63B takes?

OLD FART · Post by **OLD FART** » Wed Sep 12, 2012 5:52 am

4 litres incl filter and cooler

benno91 · Post by **benno91** » Wed Sep 12, 2012 11:17 am

Awesome thanks guys

JDSTAZ45 · Post by **JDSTAZ45** » Mon Sep 17, 2012 11:50 am

BTW...what VRS gasket kit did you use on the rebuild?
Actually I'm after a set a valve stem seals for the 12 valves. Were you able to match the the small extra exhaust valve? The usual 8 valves are not a problem....
Cheers!

benno91 · Post by **benno91** » Mon Sep 17, 2012 12:08 pm

I'll have to find out. When the engine gave up I got the head done at a mechanics just around the corner from my work. I remember they were pretty amazed with it when I told them what it was.

kiwieurospec · Post by **kiwieurospec** » Mon Sep 17, 2012 2:18 pm

Dash Headset part number: V2040K. Still available here I think (but not many) I've sent some to Aussie before. The valve stem seals I think a Honda City is close, I used some Honda ones on mine but memory from 15 years ago is not good.

Austarion

Sump Oil Lines

Sump Oil Lines

Who is online