Starion Vs Evo Vs VR4

All technical questions and answers regarding starions, being modifications to maintenance.
Galant_GT0
[P] Plates
Posts: 33
Joined: Sat May 01, 2010 3:05 pm
Location: South Australia

Post by Galant_GT0 »

Very nice, I am thinking 160-180 rwkw should see it run a low 13, high 12 with only 920kg :)
It isn't a drag car but I think it helps a build to shoot for certain figures
PROJECT - Starion powered GC Galant Hardtop

http://www.sigma-galant.com
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

Post by dirtygalant »

a friend of mine with an EX Lancer and 2.0 SOHC multipoint recently got about 184kW at the rear wheels on 16psi from a TD05H-1G turbo from an Evolution E39A Galant VR-4 or Lancer Evolution 1-3.

His basic mods are:

Starion block with Evo7 85.5mm oversized pistons, rods machined to accept 22mm gudgeon pin, arp rod bolts and head studs
FWD Galant/Sonata 8V head which had been ported
FWD manifold flipped upside down rather than cutting and shutting throttlebody ends, VR-4 throttlebody
Haltech LS-1 coils
Link G3 ECU
510cc injectors
Walbro 550hp external fuel pump
TD05-16G on stock exhaust manifold, ported

He had previously made 134kW on 10psi with a TC06 and smaller RX-7 front mount intercooler.
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
Galant_GT0
[P] Plates
Posts: 33
Joined: Sat May 01, 2010 3:05 pm
Location: South Australia

Post by Galant_GT0 »

Nice one, thats exactly what I was after, thanks dirty, your a champ :)

Cheers Jason
PROJECT - Starion powered GC Galant Hardtop

http://www.sigma-galant.com
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests