pistons

robert26t · Post by **robert26t** » Sat May 22, 2004 10:34 am

i have a JB with a stuffed no,1 piston. bore is ok and 2.3.4 are ok. cant find replacements anywhere. ordered a new set of standard size but they look like 16valve jobs not 8, and the diameter is 84 not 85. where can i find a piston, what is the standard bore? :D

Starion VR4 · Post by **Starion VR4** » Sat May 22, 2004 6:54 pm

You won't find any pistons for a starion in Australia, cast pistons anyway. You can use VR4 type pistons, ( have rebuilt 3 engines with these and they work well) Forged pistons are around $800-$1000, i am getting more cast VR4 pistons and should be around the $250-$400 depends on how many sets i buy. STD bore is 85mm.
Compression works out to be 8.0:1 :beer

robert26t · Post by **robert26t** » Sat May 22, 2004 7:18 pm

looks like i need +40 thou, + rings, what's delivery time on a set? what sort of compression do you get with the VR4's?

Barney · Post by **Barney** » Sat May 22, 2004 9:15 pm

Call ralliart order EVO 2 pistons. they will go straight in, you will however need to make the small end on the conrod 1mm in diameter bigger

ASHLY

quest · Post by **quest** » Sat May 22, 2004 11:38 pm

so you sucessfully run vr4 cast pistons in the sohc motor ?
Interesting. Curious about compression also, but I'd guess performance is similiar if starion vr4 has done it 3 times, or......
I remember an aussie site with a pretty nice 2.6 that ran inexpensive cast Mahle pistons. Also, didn't Gav run cast ACL pistons in his 2.6 ? I would think they may be available to u 2.0 guys.

robert26t · Post by **robert26t** » Mon May 24, 2004 11:51 pm

i got me hold of some brand new 40 thou over size pistons and rings :> gonna hown it out tomorrow and chuck em in :> should be good.... might have to sell starion but once itz done :(

Austarion

pistons

pistons

pistons

Who is online