aftermarket sway bars??? what brand

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
JA83
Mine is bigger than yours
Posts: 291
Joined: Tue Aug 18, 2009 6:11 pm
Location: hobart tasmania

aftermarket sway bars??? what brand

Post by JA83 »

hi i want some bigger sway bars for the f+r of the JA.
who makes them?
who has used what brand?
what did you think of them?
Are they available?
ok go
User avatar
Starion_Turbo
Enthusiast king
Posts: 898
Joined: Wed Dec 08, 2004 5:32 pm
Location: South Australia
Contact:

Post by Starion_Turbo »

Yes they are avaliable, they were whitline but are now selbys.
They are 22mm rear and 24mm front

Goto a good suspension centre they should have listings,I doubt pedders.
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
RiceThief
my mangina paid for my staz
Posts: 2129
Joined: Thu Jan 15, 2004 1:23 pm
Location: Brisbane

Post by RiceThief »

Refer to this post for a contact detail "http://forums.austarion.com/viewtopic.php?t=10127, they are adjustable too. One of the best mods you can do for handling for the price.
Starions are a disease, the only cure is poverty.

Project Grand Sport Racing Five
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

Twins.






Image
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

What was the pic supposed to be Al?
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
Junkers
Formerly StazzyBabyYeah
Posts: 2338
Joined: Mon Nov 08, 2004 3:16 pm
Location: Christchurch

Post by Junkers »

Jeepers. Does that equal double the effective width of the sway bars as a whole or double the torsional rigidity?
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

enthuzed wrote:What was the pic supposed to be Al?
Two sway bars front and rear.

It was an experiment I did a few years ago. If it's good enough for every RX3 on the planet, it's good enough for me :)

Worked very well too, you can adjust the rate by moving the end mounts along the bars. Made a big difference and all it cost me was some nolathane type material, a couple of hours and two stock sway bars.
Junkers wrote:Jeepers. Does that equal double the effective width of the sway bars as a whole or double the torsional rigidity?
I would say torsional rigidity increased but to what extent I don't know and can't measure. It was a lot stiffer than normal. Car sat pretty flat when cornering. When the rear bar was adjusted to max(?) it became very oversteery so I had to back it off.
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

Yeah, the pics didn't come out...

Error message when using "view picture" from Seamonkey/Firefox:
The image “http://www.fr33z3.net/starions/Apr06/fr.jpg” cannot be displayed, because it contains errors.

I imagine it's the same for Exploder users.
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

nah, exploder users don't get warnings before the boom
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests