Rebuild kit for steering boxes??

All technical questions and answers regarding starions, being modifications to maintenance.
fpv_escort
[P] Plater austaz
Posts: 24
Joined: Thu May 10, 2007 10:57 am
Location: tas

Rebuild kit for steering boxes??

Post by fpv_escort »

Hi there

My brother's JA starion has the worst steering i've ever seen!! There is so much play in the wheel its a joke. He's looking at building it into an improved production race car.

So was just wondering can you buy new steering boxes or is there a rebuild kit available???

If anyone has any info or ideas or prices that would be greatly appreciated.

Cheers
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

The bushes in the steering will also contribute to poor steering response. Replace them all and get the drag link reco'd. Redzone can do this.

Im looking into all of this at the moment.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

9 times out of 10 its the drag link and idler arm bushes, check them first...
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
fpv_escort
[P] Plater austaz
Posts: 24
Joined: Thu May 10, 2007 10:57 am
Location: tas

Post by fpv_escort »

Ok Cheers

Is there a new unit available or is reconditioning the go??

Where is redzone??

thanks
User avatar
www.18u
almost postwhore
Posts: 1112
Joined: Tue May 18, 2004 12:31 am

Post by www.18u »

Read his sig :roll:
Image
MrBishi
nearly postwhore
Posts: 1683
Joined: Fri Jan 09, 2004 9:11 am
Location: Seoul

Post by MrBishi »

A rebuild kit for the steering box won't fix worn gears. Generally they will only contain seals and bearings to stop leaks.

Agree that the slop is likely something other than the box too.
4G63 - 87kg
4G54 - 107kg
User avatar
greenstaz82
Mine is bigger than yours
Posts: 275
Joined: Tue Nov 09, 2004 8:29 pm
Location: brisbane

Post by greenstaz82 »

theres a place here in brissy called col robinson steering and suspension , i had my box and pump recoed threw them , cost me a fortune though . i think theres a few seals and a bit of machine work .
Adriano
I've been here before
Posts: 236
Joined: Wed Oct 04, 2006 3:21 pm
Location: Sydney

Post by Adriano »

Yeah, getting mine rebuilt about 6-7 years ago cost almost $400
User avatar
WANTSOM
Pushing my luck
Posts: 2115
Joined: Mon Jan 12, 2004 1:43 pm
Location: Sydney

Post by WANTSOM »

If at the end of the day you need a replacement steering box I have a spare one here in good condition that I dont need anymore and keen to move on so the price would be very reasonable.

But as the guys say, get the drag link and bushes attended to first and see if that fixes the problem.
Never argue with an idiot, it brings you down to their level and they beat you with experience.
Adriano
I've been here before
Posts: 236
Joined: Wed Oct 04, 2006 3:21 pm
Location: Sydney

Post by Adriano »

Greg are you running a rack?
User avatar
WANTSOM
Pushing my luck
Posts: 2115
Joined: Mon Jan 12, 2004 1:43 pm
Location: Sydney

Post by WANTSOM »

Adrian,

No, I removed the power steering and am usin the Scorpion manual box. For track work its actually a little better than the power steering - a bit more feel and the ratios arent that much slower.
Never argue with an idiot, it brings you down to their level and they beat you with experience.
Station
I like starions more
Posts: 160
Joined: Sun Jun 29, 2008 9:40 am
Location: The Wirral, UK

Post by Station »

Mine has a stupid amount of play in, there's about 10 degrees before the wheels turn. Crappy boxes, why didn't they put a rack in for christ's sake.
1987 Mitsubishi Starion 2.0 Turbo RHD with 88 - 90 engine (?), manual gearbox (MAP Sensor'd).
LSD, Intercooler, ABS, leather interior, air con
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

as posted above, its probably other issues.. get someone to shake the wheel side to side and stick your head under and see where the play is..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
ssb2005
[P] Plates
Posts: 34
Joined: Thu May 31, 2012 11:51 am
Location: South Australia

Post by ssb2005 »

can anyone recommend someone or somewhere to get the steering box / pump resealed on my JA, there seems to be minimal play but its leaking like a sieve.! Exchange box / pump may also be an option.

Somewhere in SA would be nice, but happy do deal via post. I figure I may as well do it while the enigne is out and there is plenty of room.!
mizuno man
Dorifto!
Posts: 55
Joined: Mon May 03, 2010 1:49 pm
Location: Brisbane

Post by mizuno man »

Update on the price to get a ps box reco'd.
Mine was of a poor condition from being used with out a pump for over 8 years after I had done a T/C conversion. I was lucky that I was strong enough to be able to steer it the way it was.

After discovering how to mount the PS pump and having done everything else mentioned earlier in this blog recently, I suffered huge amounts of play and was at the stage where it was becoming unsafe.

A very kind mate who has his own shop and does the deal for what he pays, BHSS $599.00. (that hurts), the tightness in the steering now is an awsome feeling though I believe that they do very good work and I think others will testify to that.

At the moment the car is on stands while I await a solution for a siezed handbrake cable. I have also replaced the brake lines with braided lines, re kitted the front calipers had the rear caliper, booster and master cylinder reco'd. I am looking forward to getting it up and running again soon.
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests