Where do these wires go? [pics]

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
Station
I like starions more
Posts: 160
Joined: Sun Jun 29, 2008 9:40 am
Location: The Wirral, UK

Where do these wires go? [pics]

Post by Station »

1989 Starion with AC!

This single pin female plug yellow wire that is part of the plug to the right of it - throttle body is to the right:

Image

This black/white wire coming from the relay box in between battery and coil:

Image

This blue female wire comes from the coil loom, but doesn't seem to go anywhere, the is a fuse above, which has nothing going into it ... I'm not sure at all on this one! It sits on the left of the coil.

Image

This is an earthing wire which has burnt out the plastic link (but still connects). It bolts to the bottom of the inlet.

Image

Any help?
MisJiF
Widebody Wannabe
Posts: 58
Joined: Tue Jan 30, 2007 1:27 pm
Location: Auckland, New Zealand
Contact:

Coil wiring

Post by MisJiF »

This coil wiring info may help with your black/white and blue wires:

http://forums.austarion.com/viewtopic.php?t=8926

Cheers,

Mike.
1981 Mitsubishi Mirage GLS
1982 Mitsubishi Starion GSR-III (Sold)
1996 Mitsubishi Galant GSR
User avatar
JPC
almost postwhore
Posts: 1016
Joined: Fri Feb 13, 2004 9:25 pm
Location: Perth, WA

Post by JPC »

The yellow wire looks like the temp gauge wire. The one that's already plugged in (from the same part of the loom) is a 2-wire connection for the ECU. The temp gauge wire is a single wire only.

The black/white wire is possibly the fuel pump test wire (if you apply 12V to it, the fuel pump will start).
Starion nutter since 1988...
1983 JA, 1984 JA, 1985 JB (all rego'd, all running :D )
Station
I like starions more
Posts: 160
Joined: Sun Jun 29, 2008 9:40 am
Location: The Wirral, UK

Post by Station »

Cool, thanks for that! There are two going into the temp gauge sensor? Is this single wire just a blank, or should it be connected?
I just need to know where that blue one goes ... I read it goes to the coil pin ... but how?
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests