Starion Gearbox Speedo.

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
User avatar
DANMAN
*** Half Century Post ***
Posts: 50
Joined: Sat Mar 11, 2006 9:07 am
Location: NSW
Contact:
Contact DANMAN

Starion Gearbox Speedo.

Post by DANMAN »

Hey guys. I was just wondering if the speedo in the 1985 Starion is electric or cable. If it is electric does it switch gnd or positive?
Daily Driver: S13 Silvia - 245 RWKW's (328 RWHP) @ 17PSI. 22PSI Coming soon!
Then I have my fast car.... A Turbo-charged Lotus seven Clubman!!!
Cheap turbo and performance parts @
www.teambooyar.com.au / www.wcr.net.au
Top
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

They are Cable driven.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
Top
User avatar
Starion_Turbo
Enthusiast king
Posts: 898
Joined: Wed Dec 08, 2004 5:32 pm
Location: South Australia
Contact:
Contact Starion_Turbo

Post by Starion_Turbo »

Also on another note, You can buy a transducer that screws between the box and cable to provide an electric speed pulse without hindering the cable operation, I used one for my apexi RSM.

They worth around $85 new from a gauge place and
require a 12v power source to be wired from the battery.
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
Top
User avatar
Xentro
Mine is bigger than yours
Posts: 307
Joined: Mon Jan 12, 2004 11:20 pm
Location: Holland

Post by Xentro »

Wouldn't it be possible to use the sensor that is normally used for the ABS?
Since that is screwed in between the cable & gearbox already.
Top
User avatar
Starion_Turbo
Enthusiast king
Posts: 898
Joined: Wed Dec 08, 2004 5:32 pm
Location: South Australia
Contact:
Contact Starion_Turbo

Post by Starion_Turbo »

Dont know, but Australian Starion's don't have ABS
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
Top
Post Reply

Return to “Technical”

Who is online

Users browsing this forum: No registered users and 3 guests