3000GT/GTO tt injector flows?

[MrBishi]

Anyone have any idea what they flow? I have a set of six I was given & am wondering if they'd be suitable for the Starion when/if MPI happens.

[SpidersWeb]

380cc x 6

Good upgrade for a V6, not so good for an inline-four.

Probably best to use VR4 injectors which are 490cc I *think* not sure, might have them mixed up with EVO.

I got the cc rating off an advert that was selling 'GTO Injectors'. Said it was a good upgrade for a VR4 V6, good for up to 400hp with right mods at flywheel.

[StarionChef]

VR4 injectors are "rated" at 450cc, not sure of the test conditions though.

450 is really too small if your chasing alot of power. They can suport a max of 160kw@wheels.

Standard starion injection is around 1600cc, so using 4 x 380cc injectors would be a backward step.

[SpidersWeb]

I found the Starion injector sizes.

2 x 580cc for 8 valve (total 1160cc)

1 x 550cc
1 x ~1000cc for DASH setup

So if you can find four of the larger DASH injectors, hey hey!

Disclaimer: These are specs I found on the web of factory Starion injector sizes. I haven't had any flow tested, or actually asked Mitsubishi.

Common choice on EVO over here, is aftermarket 790cc injectors, or Supra Twin Turbo injectors (which are roughly 790 as well).

[decoy]

how come no1 uses 4 starion injectors in MPI setups? 4x580cc?

[Steve E]

They are throt/body injectors, mounted over the top of the butterfly.
Differant style injector. :beer

[merlin]

and dont forget, in a standard staz/ecu setup, the injectors are fired alternately (i think, Dave Kitson could confirm that).

[StarionChef]

how come no1 uses 4 starion injectors in MPI setups? 4x580cc?

I have 4 800cc JB injectors for mpi Deeks

[ProZac]

They use 4 starion injectors on the endurance racing car here in chch.

[StarionChef]

They use 4 starion injectors on the endurance racing car here in chch.

What ecu do they use?

[ProZac]

A really old LINK system. It does the job tho :)