Page 1 of 1
4G63 late model head for rwd - interesting read
Posted: Tue Nov 06, 2012 8:11 am
by thrash
http://www.lancerregister.com/showthread.php?t=388459
http://www.lancerregister.com/showthread.php?t=389087
late model head - i'm not skilled enough to tell if the block is an early or late model..
8 injector itb setup
dry sump
600bhp so ~ 350rwkw perhaps
yum
pricey
Posted: Tue Nov 06, 2012 12:17 pm
by dirtygalant
that's a late model block too (engine number is stamped on radiator side on both early and late blocks).
Posted: Tue Nov 06, 2012 1:50 pm
by thrash
i thought there was no provisioning for one of the engine mounts for a north-south setup on the late model blocks? can you tell what they did to get around this?
Posted: Tue Nov 06, 2012 6:45 pm
by dirtygalant
I see RWD mount holes on the block here..
You can tell that's an Evo4+ block because of where the engine number location is placed - it is facing the radiator under the exhaust manifold in its original Evo4-9 location.
Posted: Thu Nov 08, 2012 1:13 pm
by thrash
oh yeah, I see that now - but I thought they were absent from the late model 4g63s?
Posted: Thu Nov 08, 2012 2:06 pm
by redzone
It could be a 16v sohc commercial block