Page 1 of 2
Wednesday Night Drags Eastern Creek 22/08/12
Posted: Sun Aug 19, 2012 6:23 pm
by iXNAY
Hey All,
was talking to Shannon (
www.18u) today and we were discussing about going to the drags on Wednesday night to do some runs.
we were thinking about having a meet up and mini cruise and dinner before the drags just seeing if anyone is keen.
any other ideas let me know
regards
Ryan
Posted: Sun Aug 19, 2012 6:32 pm
by 1320ft
And you would pick the week im I'm Darwin!
Posted: Sun Aug 19, 2012 6:34 pm
by iXNAY
1320ft wrote:And you would pick the week im I'm Darwin!
Sorry Aaron!
can you give everyone a run down of costs if people want to run there car down the strip?
this is my last week in NSW so thought id try make an effort to catch up with some forum members
Posted: Sun Aug 19, 2012 8:12 pm
by 1320ft
Karnts!
Yes, $50, gates open at 4.30, racing from 6pm. Make sure your helmet meets either as1698:2006 or snell sa2005 or sa2010 or has the applicable british/FIA/sfi standard. Long sleeve shirt, long pants, enclosed shoes are required.
Car must be safe, as in good enough to pass a pink slip. Battery secure, radiator overflow etc. if you are running x ply slicks, you need a tailshaft loop & quicker than 12.50 et, you need front runners. Quicker than 11.99 you will need to purchase an andra sst license, which you buy on the night. There is to be no fuel cells, pumps, lines etc in the drivers compartment.
Posted: Sun Aug 19, 2012 11:46 pm
by fugazi
.... and don't run under 11sec without a cage!!! LOL
Posted: Mon Aug 20, 2012 8:16 am
by 1320ft
fugazi wrote:.... and don't run under 11sec without a cage!!! LOL
Lol, that too.
But I don't think anyone in Sydney has the power to do it.
Posted: Mon Aug 20, 2012 11:23 am
by www.18u
Well it depends if we can use your slicks Aaron :p
Posted: Mon Aug 20, 2012 12:27 pm
by thrash
1320ft wrote:fugazi wrote:.... and don't run under 11sec without a cage!!! LOL
Lol, that too.
But I don't think anyone in Sydney has the power to do it.
how much power would you need to run an 11 in a starion?
Posted: Mon Aug 20, 2012 3:50 pm
by OLD FART
thrash wrote:1320ft wrote:fugazi wrote:.... and don't run under 11sec without a cage!!! LOL
Lol, that too.
But I don't think anyone in Sydney has the power to do it.
how much power would you need to run an 11 in a starion?
According to my trusty Moroso power speed calculator say my staz weighs 3000lbs with 325 hp atw =11.7 secs @111mph :D
You can find out here
http://www.hotrodpitstop.com/tool.php
Posted: Mon Aug 20, 2012 7:49 pm
by 1320ft
www.18u wrote:Well it depends if we can use your slicks Aaron :p
You can use the 4 stud wheels with the old 26x8,5's, but I plan on doing a huuuuge burnout to scrub in the new m&h's!
OLD FART wrote:According to my trusty Moroso power speed calculator say my staz weighs 3000lbs with 325 hp atw =11.7 secs @111mph
Yep, I keep my physical one handy, even have it here with me in Darwin. By my Moroso calcs, mine should run 9.429 @ 143.5!
Posted: Mon Aug 20, 2012 9:37 pm
by fugazi
The Moroso Slide Rule never lies... LOL
But the driver-input isn't possible to put in the calc.
Some guys over here has problems getting in the 10's with (said) 850+hp...
Posted: Tue Aug 21, 2012 9:20 am
by NXTIME
What would the ET and TS be for 700rwhp with 3400lbs?
Posted: Tue Aug 21, 2012 1:59 pm
by iXNAY
I HAVE TO CANCEL SORRY GUYS! STARION IS BEING PICKED UP TOMORROW TO TRANSPORT TO WA!
Posted: Tue Aug 21, 2012 3:41 pm
by OLD FART
NXTIME wrote:What would the ET and TS be for 700rwhp with 3400lbs?
app 9.6 @139mph
Posted: Tue Aug 21, 2012 7:19 pm
by NXTIME
OLD FART wrote:NXTIME wrote:What would the ET and TS be for 700rwhp with 3400lbs?
app 9.6 @139mph
nice ;) :beer