Austarion

...are available still.
Get in and don't be left behind. Already got one, no reason not to get another is there?

$9.00 each posted in Australia.
$11.50 each posted overseas.

Paypal austarion@live.com.au and include your address and full name please.

Finding alloys with the low offset seems pretty hard, seems getting close to 0 is about right looking back at the whole thread. I wanted 17s as the tyre choice is much greater than 16s and 18s seem to be mostly 9"+wide. So found these, wantanabe look alikes. https://www.driftworks.com/japan-ra...

Good luck on your maiden voyage.
I did similar once upon a time but simply bolted to the flange and made a sort of C shape to cover the turbo. Wobbled a bit but didn't matter, it's just to keep the heat off the underside of bonnet

The manual mentions Axle shaft turning torque 39nm or more. This is the torque mentioned by Coop1er (some call it break away torque)

Sounds like a good price, good luck with it

Has anybody used the coil mentioned in 1320ft's post with part numbers? IGC-133 PREMIERE AUTO TRADE IGNITION COIL (T TYPE) http://www.nationwideautoparts.com.au/partno_images/IGC-133.jpg I've searched various posts here and there's no real answer to upgrading the coil and getting away from an oil fi...

Lift both wheels in the air. Turn one of them. If the other turns the opposite direction you have an open diff. Same way,you have lsd. The fact you can feel it clunking does not sound right.

Depends on how long the oil has been in there and what condition it's in. If you haven't changed it before then it would be a good idea to now. But that doesn't solve the problem of it making noise.....if it's low/no oil then it may have already been damaged. As for the type of oil it depends if the...

Diff have oil in it? Has a half shaft cv stiffened up or failed? They'd be the first couple of things I'd check

They won't improve anything except perhaps your toolbox cred if you leave them in there.

Not that I'm aware of. There's a PCV on the other end of the cover that runs into the bottom of the inlet manifold.

The rear of the rocker cover. Hose runs to the oil/air separator near the air cleaner.

You need to tell us what computer you are using. Does the manufacturer have a base map you can download that can be used for startup?

I have a pair of the wb grille corners if you need them.

Hmmmm....I thought you couldn't do it nowadays so I did a bit of a search. Vicroads refer to VSB14 in their documents but they're quite vague. ( https://www.vicroads.vic.gov.au/~/media/files/documents/safety%20and%20road%20rules/vsinumber8guidetomodificationsformotorvehicles.ashx ) So...VSB14 lives ...