Austarion

i had a JA with the inside of the bonnet cut out. where the vents are.
so as to vent air in/ out. looked rough did the job.

should have kept it too. ahhh

kako si brate iz hrvatske sviga mi se tvoji auto. dobri su.
volim americki model ima dobar izgled.

zivio od Tom

i had a set of 240z rims on my JD. with miner 5 mm wheel spacers.
they say 6-jj x15 -20 on em if this helps.
& they have 215/60/ 15 inch tyres on em.

cheers buddy

try Advanced spoilers & creative cars for a front lower lip.
phone (08) 8258 40 49

or for a reproduced JD lower spoiler lip. try Cox Automotive
(07) 5443 3507

hope this helps otherwise go custom :D

update: i put some new hoses on from under the throttle body centre connection to the Bov. reconnected a hose that goes to the round thing near the boost sensor to the right side connection under the throttle body. & put some zip ties on to keep hoses on so as to not slip off. when i did this th...

what brand / model of bov is it ? it's a cheap bov with holes around it with a bolt type cap on it where u fit the hose to it. :D i refitted a hose from the right side of three hose connections under the injection throttle body to the bov. the hose from the round plastic thing re-routed back on the...

More info? Did it use to work? and has now stopped or is this the first time you have connected it up? You may need to come directly off the inlet manifold to you BOV valve, don't tie into anywhere else. Put all the hoses back in there original position. :) yep the bov worked in my JA. i'll try thi...

the connections seem fine just not making any noise. the hose connected to the Bov comes from a black round thing near the boost sensor, on a JD Starion. the round thing has two hoses coming off it one to the boost sensor the other too the the air box. is this connected right? would appreciate some ...

looks mad, suits the car tooo

like the front spoiler bumpa.
Is the spoiler modify'd in any way?

u fittin a Front mount intercooler?

good stuff

i just made a rear parcel shelf out of 12mm mdf board used the original as a template. had an old parcel shelf screwed the hinge to the new parcel shelf. fitted 6x9's & a 12inch sub in the centre.
6 inch sony x-plod's in the front doors.

sounds good too

thanx, i'll try the sikaflex 227 soooon. i'll let u all know how i went. Hey man. How did the 227 go? I've got a 3 piece to go on too and then I found this thread.... :wink: Went good i parked the car as close to the side wall of my garage & put the sikaflex in the gaps then put a piece of roun...

chunkhead wrote:Pics would be real nice! :D :beer

will have some pics hopefully after the next starion cruise on the 22nd
keep u posted

cheers

sorry i don't have a digital camera. will take some pix of my stereo & speakers i recently installed. In the front doors, 6 inch sony x-plod 240watts. replaced my old 4 inch speakers. rear parcel shelf 6 x 9's 320 watts. I will see how hard it will be to take a door lock off. & then i may ta...

had fun fitting these buggers on my Starion. when you file the door lock hole out watch that the file doesn't slip out and u scratch the paint. trial fit door locks as u go file a bit at a time. i don't know what type of file to call it. so here goes use the half curvy file, file the top & sides...

first i tryed unpluging the injector plugs and reconnecting them. i unplugged one of the injector plugs: car stopped smoking out the rear muffler. also tryed replacing the injectors: motor didn't want to run propally. also replaced the original injectors back in. removed wiring plugs from computer, ...