Austarion

I know wiseco makes forged pistons for around $1300, are there any other manufactures that make pistons for the 4g64??(2.4ltr) Also I was told by coltspeed that the 64 crank could not be easily fitted into the 63 block as there is interference between the crank and block due to the extra throw. I th...

Mate at work had both his cars outside when it happened and both windscreens smashed as well as quite a few dints on the panels. S'pose that's what you get when you turn your carport into an extra room, luckily both cars insured.

I've got a cylinder head that came off an L300 to replace my jet valved head, just curious if the valve sizes are different from the starion head. Rough measurements of the valve sizes L300 are Inlet- 42.5mm (with 80 or 08 cast on combustion chamber side) Exh-35mm What are the dimensions of the star...

Just on a side note, what are those nuts for, that are welded on the side along some of the runners in the finished pics? Nice work by the way.

Did you buy the 4 into 1 piece from anywhere or did you make it yourself?? (The part directly under the turbo flange)

820 grams or there abouts.

fair go mate, I got that same keyboard and some days that 11mm is just too far to move :)

I considered milling up an adapter plate out of aluminium a while back, but when you really look at the two injector setup and the way the manifold branches at the bottom, you have to wonder if all cylinders will recieve the same air/fuel mix consistently if you rotate the top cap. I'm sure Mitsubis...

3.785 litre's in a gallon so at AU$1.40 a litre that equates to AU$5.30 a gallon, so at the current exchange rate works out we pay about US$4.10 a gallon for fuel over here mate so we haven't exactly got it made. :x

I had the exact same turbo as that on my stazza when I got it, it's a plumb back BOV, which strangely has a contact switch in the top which is activated when the bov vents, switch on mine wasn't connected to anything obviously.

I don't think the standard airflow meter gives much flow, but you could possibly chop/adapt the airflow unit into another airbox, or better yet into a short length of pipe, with an i/d to match the large o-ring and mount what electronics you can externally. This would allow a pod filter to be attach...

Just need one I can machine up and swap over for the one already on there, as it's my daily runner.

Looking for a dead tc05 turbo, or just the exhaust housing if someones got one they don't need. cheers

Isn't this a Starion Forum?? :?

Multipoint up and running now, using a modded Sonata manifold, VR4 injectors, VN throttlebody, Haltech F9 (fuel only), custom wiring, etc. etc. Took the whole weekend to install plus about 6 weeks previous to do all the fabrication/wiring and chase up every other part needed. Now it starts and idles...