Search found 48 matches

by edge
Tue Jul 17, 2007 4:47 pm
Forum: Buy / Sell
Topic: WTB: Starion, NZ
Replies: 4
Views: 981

i got one check on trademe im lookn 4 a 4wd hilux (not a surf)
by edge
Fri Oct 20, 2006 9:22 am
Forum: Technical
Topic: stazz wheels?
Replies: 16
Views: 2116

yea bigger is better ive got 225/60/15 on the rear good for traction
by edge
Thu Oct 19, 2006 9:22 am
Forum: Technical
Topic: 3 or more injectors
Replies: 48
Views: 7735

i used the standard fuel reg.yep has alot more response ive also got a greddy unit that i wnt to wire up but dont know where the switches have to be set
by edge
Wed Oct 18, 2006 6:15 pm
Forum: Technical
Topic: 3 or more injectors
Replies: 48
Views: 7735

another thing i have used honda injectors they have the same resistance.
i dont know what cc they are but they are the best injectors i have had.
its the honda 5 cylinder engine
by edge
Wed Oct 18, 2006 6:11 pm
Forum: Technical
Topic: 3 or more injectors
Replies: 48
Views: 7735

ok get the manifold and change the throttle body end for end i just used the same throttle body the fuel hoses are a pain but will fit the injectors have to be wired up #1 & 4 injectors wired together and #2 &3 wired together so you will have 2 negative wires and two positive you also have t...
by edge
Sun Oct 15, 2006 12:33 pm
Forum: Technical
Topic: 3 or more injectors
Replies: 48
Views: 7735

hi guys sorry for the long delay had a few problems with the engine droped something down the inlet manifold and banged up no 4 piston pretty bad and bent some valves pissed me off so i pulled out the engine got it all fixed up and put evo 1 pistons in standard rods all new bearings,rings gaskets an...
by edge
Thu Aug 10, 2006 5:56 pm
Forum: Technical
Topic: 3 or more injectors
Replies: 48
Views: 7735

yea my car ran real good without the afm i was running around 14 psi.ok ive worked out the problem i need bigger injectors i found out that the ones i have are only 210cc i need twice the size off a vr4 or similiar that is why it is cutting out any one in nz got any?
by edge
Mon Aug 07, 2006 6:33 pm
Forum: Technical
Topic: 3 or more injectors
Replies: 48
Views: 7735

all im going to do is chop off the end after the trottle body so i can still bolt it on then weld a plate over the end then get a hole saw and cu a 2" hole in the other end and weld the flange on there. easy
by edge
Mon Aug 07, 2006 10:22 am
Forum: Technical
Topic: 3 or more injectors
Replies: 48
Views: 7735

i took the air flow meter off a long time ago an it still ran sweet (before i put the multipint in) i dont know what happend i have changed the ecu from the origanal one i had also a long time ago i think i will get the turbo plumbed up and see what happens i still have to take the maifold off an ge...
by edge
Sun Aug 06, 2006 6:02 pm
Forum: Technical
Topic: 3 or more injectors
Replies: 48
Views: 7735

yea i took it for a drive with the turbo not connected and it ran like crap wont rev up under load may need the turbo connected? not to sure the boost gauge read the opposit way and may be telling the computer to shut off the injectors i hope so ill wait and see when i have the turbo connected if so...
by edge
Wed Aug 02, 2006 7:09 pm
Forum: Technical
Topic: 3 or more injectors
Replies: 48
Views: 7735

all good so far still have to move throttle body around and re do the inter cooler pipes going to take it for a drive on the weekend ill let you know what happens
by edge
Thu Jul 27, 2006 4:55 pm
Forum: Technical
Topic: 3 or more injectors
Replies: 48
Views: 7735

i think it is a - input. glad to see someone else interested in this every one says no it cant be done.you should have four wires to the injectors two of them have a black stripe you should be able to use one of these i tried both ways it didnt seem to matter it still ran and just to see if it whent...
by edge
Wed Jul 26, 2006 8:45 pm
Forum: Technical
Topic: 3 or more injectors
Replies: 48
Views: 7735

na i have wired all the injectors to one wire from the computer but im only running the wire with the black stripe to the smaller wires from the injectors and straight to positive on the other wire to the injectors will have more of a play around on the weekend
by edge
Tue Jul 25, 2006 4:35 pm
Forum: Technical
Topic: 3 or more injectors
Replies: 48
Views: 7735

Image
by edge
Tue Jul 25, 2006 4:24 pm
Forum: Technical
Topic: 3 or more injectors
Replies: 48
Views: 7735

it runs ok havnt taken it for a drive yet no licence (speeding in the starion)
:oops: ill do picks later the manifold is off a frount wheel drve so i still have to move the throttle body may do that next week when i get my licence back its been a long 3 months