Austarion

Are you driving down to Vic or Hiring a car while you are down there?

why don't you try these guys, they are on the gold coast

http://www.racinglogic.com.au/

Zac what rack are you thinking of, the excel rack, you could fabricate a nice bracket to weld to the cross member, the thing i would first be looking at would be finding a coupling section that did not require welding and would fit neatly between where the rack is mounted and the bottom of the steer...

the water temp sensor in below the thermostat housing, there are 2, one is for the EFI and the other is for the factory guage, the oil pressure sensor is below the oil filter, i would suggest getting an electronic oil pressure guage, don't run oil pressure lines into the car. something like below ht...

Jason

the manual steering racks i think are all the same, they run around 3 turns lock to lock, the main thin i was after was the distance between the 2 inner ball joints was almost the same as the inner rod ends mounted on the drag link, this will minimize the chance of bump steer

John

I am sorry to hear that, i always worry when i buy things from overseas, till now, everything has arrived

John

Ricethief

yes, it took me a while to get them, probably 2 months from order to receive, they had never done them before, i had to do all of the measurements and draw diagrams for them. i did get a bit worried that i was not going to get them, but they arrived, just slow

John

the wheel that will be on the car http://i819.photobucket.com/albums/zz112/austarion/john196701/IMG_1048_zpsef9069b1.jpg the body had been 2 pack primed waiting for paint, the other photo's had it as bare metal http://i819.photobucket.com/albums/zz112/austarion/john196701/IMG_1049_zps4400239b.jpg i ...

Fugazi No i did not tie the front struts towers to the cage the steering rack does not touch the sump, the only thing that goes close is the mounting bracket, the center line of the rack is basically the same as where the drag link sits Woodie It will be a while before i try them, i like the fact th...

Hello

are the 3.9 diff gears still for sale

John

Fugazi the cage is a close fit, the main hoop and the front legs are almost touching the body, i hole sawed two holes in the floor under where i welded the plate for the hoop, this allowed me to keep it tight, i had the smallest head on my TIG welder, still very hard this pic gives you an idea how t...

I bought Barups old car from Vulpes after he started to strip is, i bought it as a project for my son and myself. He helped me strip it, he is only 10, i proceeded to clean the car, removing all of the sound deadening throughout. I bought a weld in cage kit from Bond Roll bars, what a fun job to wel...

Thrash I have not done much to it lately, building a track car, JB, ex Barup's car, it has been stripped, i have welded in a cage primed and ready for paint, working on the brakes at the moment, 13 in disc's and 6 spot calipers for the front and 12.2 for the rear and 4 spot calipers, twin master cyl...

I am in Melbourne from tuesday till late friday, staying in the city, little collins st, going to the F1 on thursday, working the other days

John

the fuel pressure on a standard throttle body injection is around the 43psi mark, the pressure dose not change till you are on boost, the line from the regulator goes to the fitting just above the throttle body