Austarion

Thanks RiceThief but I've decided to just go with it. It's such a pain to diagnose and I had been thinking about doing it anyway. The plan was to keep the tbi as I don't really want massive power, the car is in really good condition and I'd like it to at least seem stock still. I'm not doing anythin...

I thought the dizzy was optical, it has the silver disc with the slots in it. I'm in Perth WA so I don't think borrowing an ecu would be quite so easy. Is the third valve really that hard to work with? I would've thought it would've been similar to Toyota's TVIS system on the 4AGE where it opens air...

The map sensor supposedly gives the intake manifold it's own air supply after the throttle plate just for idle

They were gonna add a map sensor that supplies it's own air for the idle and delete the stepper motor and air flow meter

So I've had it with the GSR-V. I've checked every sensor over and checked the signals at the ecu and can't fault anything. So I believe my ecu is at fault and causing my weird idle which hasn't gotten any better. The codes it was flashing out of the diagnosis connector were for the oxygen sensor and...

Thank you coop1er! I've been looking for something to tell me how to read these damn pulses. I had found a list of codes but nothing on how to read them. From memory I'm sure that one code is definitely the oxygen sensor but I'll look into the others later. Oh and thanks to niss720 it took a bit of ...

I am using a led testlight. It's flashing different sequences with a gap with no flashes for about three seconds and then a different sequence of flashing starts.

Hmmm they don't seem to match up. Looks like it's plan B. Testing every sensor's output at the ecu

I unplugged the airflow meter and it gave me two new codes. Two outputs maybe?
___---_-_--_--_-_-___

___---_--_--_--_-_-___

This is why I think there are two different codes. http://forums.austarion.com/viewtopic.p ... ght=binary
This guy seems to be getting similar codes but I have no idea how to interpret them.

I'm confused. Is there a way I can put a video on here because I have recorded the pulses to make it easier for me to count.

Why are there two seperate series of pulses then? I would've figure two seperate codes. Especially since I didn't have the second series until after I've driven it.

I disconnected the battery today to wipe the codes. I let it idle for about 15min which it did fine. The cold start idle up worked and then dropped slowly as it should. So I checked for any codes, it only had one which it kept repeating. ____---_--_-_-_-_-____ The spaces are seconds it was on/off. U...

I used a led test light and it's flashing a lot. Are the codes for a Sirius dash head on here? I can only find one post mentioning them being binary codes but no list of them

Is this it? Has a black wire and a blue/yellow wire. http://i1279.photobucket.com/albums/y537/Gsrv/Mobile%20Uploads/image_zps2cf3509f.jpg I have a wiring diagram for a JD but not sure if it's a direct crossover as it's been right about the wiring to the idle stepper motor but it's saying the wires t...