Austarion

what ecu are you using?

Hi there I had exactly the same problem with you after I changed the head gasket. I left the car like that for a month o so and after that I decided to fix it then I took the head out again and saw that I had put the valve springs wrong. the valve spring go on way .if you look at the spring you will...

I am using an e6x. You don’t need more for your engine. I am making 218 bhp on a stock engine with mpi and dual coils waste spark and 14psi of boost. The car runs great for over of 4 years now.

i always use japan parts on mine. VIC 304.

i know that i mean about the timing advance curve at WOT with vacuam and with boost.

does anyone know what the stock timing advance is?

Hi there to all I am just making this topic to ask all you what is the a/f ratio that you are using at your engines for 14-20 psi of boost so that it can make maximum power and it can be safe for the engine too. And how much timing are you using at this boost with pump gas.

Hello there to all starion owners. I am an owner of a pajero with a starion engine 2.0 turbo .the engine is stock never been opened with 150.000 km on it. the only things I have done with the motor is :multipoint manifold from l300 and the optical dizzy ,440 venom low ohm injectors, dual coils for w...

haltech e6x very good

i just have dyno my car tis is a mitsubishi pajero with a starion engine and it made 155 whp. what do you think guys about this ? is it ok or can it go more with 0.7-0.75 bar of boost?

Hello there to all starion owners. I just want to ask what is a normal power that will make a starion engine with stock engine multipoint injection waste spark ignition and 0.75 bar boost.

yes my friends the regulator on the starion works only when your car goes on boost. at idle and vacum you must have a fuel pressure about 3 bar and when you go on boost it goes about 3,5 thats it.

i am using haltech E6X fantastic making 206 hp with every thing stock on the engine

no manifold is the same as you do is with full throttle

No problem mate the only thing you will need is an aftermarket ecu.