Austarion

Input shaft from the gearbox to the engine? ;) Need to machine a bush to sit inside the end of the crank. It will probably have a phosher bronze bush or a roller bearing in the end just to support the input shaft. If you need your gearbox bellhousing done to the same spec, then drop me a line and w...

Station wrote:There's a local scrappy tome who is selling an EVO 3 engine for 400 quid. I'm also from the North West!
I'm tempted to do this as my engine is giving me total nightmares! Doe the shaft fit okay?
You haven't got any bits from your old engine (ECU, map sensor etc)?

What shaft are we talking about ??

Got let down in the UK with people that want to keep hold gearboxes etc.. that they will never use, just so they can tell there mates they own one.. Hence why I have done it this way. Wanted to keep everything Mitsubishi. A close ratio 'Dog' box is hopefully going to go in. A complete gear kit/dog e...

1. Machine a boss that fits into the end of the EVO 3 crank where a spigot bush normal is. Machine another hole in the boss the same size as the input shaft of the gearbox. 2. Machine 2 unwanted M10 engine to gearbox bolts down to a tappered point to similar to a centre punch. Cut a slot in the end ...

How's it going getting that exhaust manifold and turbo arrangement to fit in? I've been looking at a manifold that looks identical to that one, and was planning to just cut the turbo end off and weld my own on like you did, but then I thought maybe i'd prefer to have up turbo high mounted for space...

How's it going getting that exhaust manifold and turbo arrangement to fit in? I've been looking at a manifold that looks identical to that one, and was planning to just cut the turbo end off and weld my own on like you did, but then I thought maybe i'd prefer to have up turbo high mounted for space...

http://img293.imageshack.us/img293/1373/image108jn0.th.jpg http://img65.imageshack.us/img65/9281/image109fc9.th.jpg http://img74.imageshack.us/img74/7271/image110jc2.th.jpg http://img293.imageshack.us/img293/5572/image112af2.th.jpg http://img293.imageshack.us/img293/6756/image115dq8.th.jpg

How do I drop the L learner plates.... ha ha

EVO 3 engine on Starion engine mounts - Installed. Turbo underslung.

[/b]

http://img142.imageshack.us/img142/1619/image059mz6.th.jpg http://img262.imageshack.us/img262/4684/starionseamadjustablerewb4.th.jpg http://img262.imageshack.us/img262/9123/starionseamadjustablerehp3.th.jpg http://img262.imageshack.us/img262/5986/starionseamadjustableresq6.th.jpg http://img503.imag...

Rear of cage http://www.fr33z3.net/starions/Apr06/feb_08_fotos_and_wedding_230.jpg Crossmember for EVO 3 rack http://www.fr33z3.net/starions/Apr06/feb_08_fotos_and_wedding_209.jpg Housing for fuel tank http://www.fr33z3.net/starions/Apr06/feb_08_fotos_and_wedding_227.jpg A Pillar and cage gussets ht...

The cage is done in CFS3 steel ( Cold Formed Seamless ) which is a replacement for CDS2 ( Cold Drawn Seamless ). The cage has been done to the RAC MSA Blue book. The cage is completely done apart from the door bars as we are 2 old men who dont like climbing over the bar whilst we are working on the ...

Sorry Brendan,
miss understood the 'clicking' noise.

Pete

Brendan,
could be a worn ring gear on the flywheel. The ring gear will only used in 2 sections of the ring gear. They will be approx. 180 degrees out, the rest of the ring does not get used. You can sweat the ring gear off and move it around so a new portion gets used.

Pete

Rear suspension turrets allowing camber adjustments http://www.fr33z3.net/starions/Apr06/starion_seam_adjustable_rear_turrets_19_12_07_014.jpg Front cage trianglation http://www.fr33z3.net/starions/Apr06/starion_seam_adjustable_rear_turrets_20_12_07_015.jpg http://www.fr33z3.net/starions/Apr06/stari...