Search found 494 matches

by Lummy
Tue Jun 24, 2014 7:29 pm
Forum: Buy / Sell
Topic: JB lsd for sale qld (small diff)
Replies: 4
Views: 867

Complete diff or just the LSD centre?
by Lummy
Tue Jun 24, 2014 7:28 pm
Forum: Technical
Topic: Steering idler arm bushes
Replies: 4
Views: 880

Nolathane ones are rubbish from my experience. I now use nothing but Whiteline bushes - far superior in my opinion. Reasonably priced too.
by Lummy
Wed Jun 11, 2014 8:05 pm
Forum: Technical
Topic: Improved Production Racing
Replies: 9
Views: 1390

Can't go more than 15 inch for early model. 15x8 would be the biggest you can go.

My car weighs in at just under 1200kgs race weight.
by Lummy
Fri Jun 06, 2014 1:59 pm
Forum: Twin Cam Land
Topic: Yet another twincam build thread
Replies: 12
Views: 1816

Tiny - I don't have any here to measure, but at a guess, 1mm.

It's amazing how quiet the top of the motor is with these lifters compared to the old ones.
by Lummy
Tue Jun 03, 2014 5:53 pm
Forum: Twin Cam Land
Topic: Yet another twincam build thread
Replies: 12
Views: 1816

Yep, the ports on the VR4 head are way oversized. Much better response from an EVO head. I run the VR4 head on my motor and it's good, but it would be even better with the smaller ports. Highly recommend the later model lifters - my engine ticked like a bastard with the VR4 lifters and sounds sweet ...
by Lummy
Wed May 28, 2014 6:20 pm
Forum: Technical
Topic: Improved Production Racing
Replies: 9
Views: 1390

There's not enough advantages to running LM over EM in my opinion. I would stick with EM and therefore and have no minimum weight. 8 inch rims is plenty - lap records have been set on 7 inch rims. I've raced IP on/off in NSW and VIC. It is a great racing category - VERY competitive and ends up costi...
by Lummy
Wed May 28, 2014 5:55 pm
Forum: Buy / Sell
Topic: Evo 3 / RVR motor (Small Port)
Replies: 4
Views: 906

Pics?

Doesn't the RVR motor have a front-exiting coolant outlet?
by Lummy
Sun May 18, 2014 8:29 pm
Forum: Technical
Topic: Leaky Injectors
Replies: 6
Views: 892

Are you sure it's on o-ring that's leaking? Could be the injector itself.

From my experience, when o-rings leak, they leak good and proper, spurting fuel everywhere.
by Lummy
Sun May 11, 2014 8:37 pm
Forum: Technical
Topic: Front Wheel Shaking at around 60km
Replies: 13
Views: 1451

How much negative camber do you have?
by Lummy
Tue Mar 04, 2014 7:31 pm
Forum: Technical
Topic: Conversions
Replies: 20
Views: 1065

1320ft wrote:
redzone wrote:Paying a workshop to do a dohc conversion with a proper engine build etc you're looking over 20k. Shit adds up very quickly!
Or a well built engine, with the good bits will cost more than 20k on it's own.
I'll build you one for half that. All top-brand parts.
by Lummy
Tue Feb 11, 2014 5:59 pm
Forum: Buy / Sell
Topic: Extended sump
Replies: 18
Views: 1455

A while ago I spoke with that guy and he did seem open to the idea of making them again if you could get a group-buy happening.

They look pretty good.
by Lummy
Sun Dec 29, 2013 8:16 am
Forum: Buy / Sell
Topic: Advanti wheels...(4)
Replies: 4
Views: 577

I ran Yokohama 205/50/15 A048 semi slicks. People have also succesfully run 225/50/15 on 7 inch rims.

But they have no tyres on them now.
by Lummy
Fri Dec 27, 2013 11:13 am
Forum: Buy / Sell
Topic: Advanti wheels...(4)
Replies: 4
Views: 577

New price - I just want them gone.
by Lummy
Sat Dec 21, 2013 6:39 pm
Forum: Buy / Sell
Topic: Advanti wheels...(4)
Replies: 4
Views: 577

Advanti wheels...(4)

15x7
+5 offset
5 x 114.3

Great condition

$100 new price. No offers.

Image

Same as these but without the "carbon fibre" inserts...

Image
by Lummy
Wed Dec 18, 2013 6:36 am
Forum: Buy / Sell
Topic: Roll cage, possibly fit starion??
Replies: 3
Views: 440

Never mind CAMS, if you value your life, you wont use one of these.