Austarion

I thought all computers had a base map in it? and when you get it Dyno tuned they modify these base maps?

Welcome to the forum Al. Looks like you might have a bit of work ahead of you but I did a similar job here in Australia and I asked many questions on here and learnt that much that I was able to get the car to an acceptable standard for me to drive around in. At times I felt like giving up but the f...

Very good write up Alspos.
Thank you.
I will have to replace my bush next time I have the gearbox out.

Looks a lot better then mine and I drive mine on the road, :D

RiceThief My tyres delaminated on the dyno and did this damage, is it repairable? If so who in Brisbane would be the best contact? Look, I hate to tell you this but there is no way that tyre is repairable. I worked as a tyre fitter some years ago and I can say with 100% certainty that it is not repa...

I don't really have a lot of thoughts on this ~ must be from years of drug and alcohol abuse :D . But personally I would stay with the single overhead cam and the reason I say that is because that's what I got and I am putting 30 PSI of boost through it and it is awesome. Well my gauge reads to 30 P...

Are you building something for a daily driver or are you going racing with this engine?

I want to fit flexblade wipers to my Starion but they don't actually have a listing for them. Has anyone on here fitted flex blade wipers to their Starion? And what were they for? I could modify my wiper arms to a hook type using the hook part of a Toyota Hilux and then get 18" blades to put on...

I was having problems with my fan heater not working so finally decided to pull the switch out and have a look at it. I did test to see how far the electricity was going and that way worked out the problem was in the switch. Connected a wire from battery to fan motor and it worked. Well, the problem...

It lives again. :D The problem was caused by the sensor on my exhaust pipe shorting out. Now I just have to bolt everything back in and voila, all good. Life is wonderful. I would just like to take the opportunity to thank all members on here in there effort to assist me with finding the problem.

G'day popup In the relay box is 4 fusible links and I have all removed. The link I am talking about is the one comes from under the box, is white in colour and then has a connecter that goes to the + side of the battery. But I am still thinking it is a problem with the fuel pump like you suggested b...

Thank you RiceThief [img][img]http://i819.photobucket.com/albums/zz112/austarion/Schultz/M8002_zpsc3e0a728.jpg[/img] That is my wiring diagram for the M800 computer. So I need to check pin 17 and 18 that goes to a 20 amp fuse for 12 volts? What about pin 19? That is the relay for the fuel pump. I ju...

G'day RiceThief Yep it is not starting. I was just in the shed and pulled the computer apart, could not see any damage. With it unplugged the link DID NOT get hot. So I plugged it in again and the fusible link gets hot again. Also I don't think its the actual computer causing the problem just that t...

Alright I have removed the starter motor - same problem. Disconnected all tail lights - same problem. Disconnected computer - same problem. Changed the relay holder next to the battery from spare car - same problem. My next option is to pull the dash out and disconnect all the plugs in there and if ...