Austarion

Noddy is right, and Nachoman shouldn't need pics!

Noddy bought the gasket, and I only had to enlarge the holes slightly for a good fit - Nachoman was watching at the time

Yep, I'll be in that.

Mine currently reads:

JPC - 2 x Black S, 1 x Black 36, 1 x Black L

It should be:

JPC - 2 x Black S, 1 x Black M, 1 x Black L

...cos Black 36 is the colour!

Yep, they plug straight in.

I'll have:

2 x Black 36 S
1 x Black 36 M
1 x Black 36 L

...and I'll have 'em posted to Noddy's PO box, along with Nachoman's :)

It could also be the MAP sensor, or a leak in the vac lines.

Yep, me too.

There's a real Delorean complete with flux capacitor at the Whiteman Park car musem in Perth...

I saw a silver Staz today at about 6:45pm, travelling west along Hepburn Ave, with a JD rear spoiler. Didn't see much else, as I was behind it. Rego was ARX 60E. Anybody here own it?

Your Tech Toyz business card isn't prominent enough in the picture, Jason

The two white resistors are the in the power supply line to the injector solenoids. If these break, more than likely the car won't run at all. From memory, they should be 6 ohms.

Is the check valve in the vac line working ok?

Same here - I'd take a couple of 'em.

...and I bet they have two rearview mirrors, one for each of the driver's heads

If you're at idle and you push hard on the brake pedal, does the idle change? If so, the diaphragm in your brake booster is is stuffed, and you need to rebuild the booster. If that doesn't happen, you probably have an air leak outside the booster which partially seals itself when things heat up and ...