Austarion

Any machine shop will easily be able to machine a recess into the adaptor to suit a small thermostat, however it's not an ideal setup if you're talking about doing it at the flange of the adaptor against the head... What I was thinking, but may as well ask before production starts. Ideally you want...

40mm thick?

can you mill lip for a thermostat to fit at the back of the adapter?

Whats the other side of the adapter look like anyway?

251 Princes Hwy, ALBION PARK - passed by today - yes they have it.

Now for a dual maps - 98 and E85 tune

airbats801 wrote:interesting. DId the gh have any kind of bodly styling like that turbo one in the picture?

The GSRs have a similar rear lip - the front spoilers are a bit different - finding a good one is a challenge.

Got a few more bits today. Flywheel bearing if it helps anyone is from a supra - same OD as sigma but 12mm ID. No idea if Starions are the same OD. ------ 6201 LLU/2AS. Bushes for the shifter ( my box is a wreckers lucky dip :roll: ) Shifter Support Seat Bush ------- toyota PN# 33505-35020 White Piv...

VR4 flywheel - more off the shelf aftermarket support - clutch options. Don't know if the vr4 starter would work - if you look at the shim plate link - the position of the starter - With the Dellow bell would be like the rear one. Try it let us know :D Bell cost me $350 ebay ( non hydraulic - no mou...

Hi Guys I just ordered one of these dellow bellhousings that converts a VR4 narrow block to W series Toyota box that I am fitting into my improved production 1976 Lancer race car. I was lucky as they don't usually stock them but someone has just had one made so they made a spare, more then likely o...

Will be doing this on a sigma soon. Have the bell and box.

Lummy - What did you use for clutch release - cable or hydraulic.

pix if you have any.

Edit: - and out of curiosity - why Allen head bolts.

1UZFE TURBO 4WD IN TA22 if you have the $$$ or know how - anything is possible. http://www.v-eight.com/tech_forum/viewtopic.php?f=10&t=544&sid=c32628164b2352d266bec2505d901ee0 may need to register to view - but worth the look. http://www.toymods.net/~rod/Celicas/Jamies%201UZ-FTE/DSCF0727.JPG

Cross member is half starion half s13 silvia

more info on that please.

and is that a s13 rack as well.

enthuzed wrote:If you keep going with it, where will it take you?

backyard "Stunt Car Racer"



Top Work

its an El Cheapo stainless steel one from eBay - cut the flange off - flip - re-weld

turbo is a GT35/40

not a staza - just a cousin