Interior handle trim and Handbrake Button

Technical questions and ideas regarding how your Starion looks inside and out, bodykits to stereos.
Post Reply
User avatar
Neil
Big Dorifto
Posts: 85
Joined: Sat Feb 23, 2008 8:52 am
Location: Jerrabomberra, NSW

Interior handle trim and Handbrake Button

Post by Neil »

Hey Guys,

Anyone know where I can get new interior door handle trims. Mine are a bit average. Are there any other cars that have the same bits that I can pillage some off?

Image
Image

Also - same thing with the handbrake button - mine is split in half - and how does it come off - does it just screw off?

Image
1987 JD Starion
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

Handbrake is the same on magnas scorpions etc. Look for one at a wrecker with a nicer button. You can peel the colored boot off and fit it on the replacement one.

Never pulled the button apart on one, so don't know if it can be removed and refurbished easily.
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

There's a crimping of the pressed metal at the end, once you spread it you can unscrew the button.
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
Bitza
I've been here before
Posts: 244
Joined: Mon May 29, 2006 1:53 pm
Location: Adelaide SA

Post by Bitza »

As for the first photo, the escutcheon is the same as cordia....all models.
User avatar
Neil
Big Dorifto
Posts: 85
Joined: Sat Feb 23, 2008 8:52 am
Location: Jerrabomberra, NSW

Post by Neil »

Cheers Guys, looks like I'm off to the Mitsu wrecker
1987 JD Starion
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

The problem of the red interior, a lot of this stuff gets tossed away...
My advice is go on the Starquest forum and perhaps become a member. A lot of maroon interior is up for grabs there...
Just need to be persistent! Here's one post and I remember a guy called 'Burton' has this stuff too.
http://www.starquestclub.com/forum/inde ... pic=137699
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
User avatar
panda
Enthusiast
Posts: 680
Joined: Fri Apr 18, 2008 2:56 pm
Location: Mount Gambier, South Australia

Post by panda »

PM sent. Might be able to help you there.
Dreams have no limits.

1982 JA - Ex Enthuzed
1982 JA - For Sale - pending
1983 JA - Ex Auto-cross car - being parted out
1983 JA - Being parted out
1984 JA - Rolling shell - For Sale
1985 JB - Rally car project
1985 JB - Autocross car
1985 JB - Week-end cruiser
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

I have a few good red internal lock surrounds :beer
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest