Supra G/box conversion clutch

[vr4ced]

Hi,

I have here an unused clutch made by Direct Clutch Services in Queensland. Was designed to mate a VR4 to a Toyota Supra gearbox.

It is a narrow block heavy duty single plate clutch. This is essentially, a 2L or narrow 2.6 Astron clutch kit that I asked to have the centre core on the clutch plate matched to the W5* series Toyota gearbox.

I bought this in 2010 and have bolted it to an engine as a dummy fit. It was removed and has been in storage ever since. Has never had a gearbox bolted to it. I did slide the clutch plate over the gearbox spline to make sure it was the same - it is.

What you see is what you get. Add your own Dellow bellhousing, Supra box and throw out bearing and you should be set.

I paid $600 back in 2010, will sell for $300 as I'm cash strapped and I can always come back to this later.

Located in Adelaide. Will post Australia wide at your expense.

https://dl.dropboxusercontent.com/u/145 ... rion/1.jpg

https://dl.dropboxusercontent.com/u/145 ... rion/2.jpg

https://dl.dropboxusercontent.com/u/145 ... rion/3.jpg

https://dl.dropboxusercontent.com/u/145 ... rion/4.jpg

https://dl.dropboxusercontent.com/u/145 ... rion/5.jpg